33 Zones Door Frame Archway Walk Through Metal Detector

33 Zones Door Frame Archway Walk Through Metal Detector


Features
 
1- Easy Assembly
JH-33Z, 33ZONE Modular design allows for a quick and easy assembly, only 4 screws to mount it.
 
2- Pinpoint detection zones
there are 33 distinct pinpoint detection zones for full target coverage on the left, centre and right side of the body from head to toe traffic lights on the entrance of the archway ,there traffic light to remind you the detector is ready for passenger.
 
3- Audible and visual alarms
there is audible alarm and visual LED lights signal when a target has been detected ,the pinpoint lights on the exit gatepost will show the location of any offending object.
 
4- Touchpad controls
The accesss control panel is designed for use by authorized personnel with specific,multi-level security codes.it allows authorized users to change settings.
 
5- Self-test
no battery is required for memory retention.while the unit is in operation,a self-test is performed , any failures or problems will be immediately reported on the LCD display
 
6- Networking ability(option accessory)
The functions of networking, remote control, monitoring, data analysis and group management all are available(see below images).


 
 
Specifications:
 1) Operating Temperatures
 -20°C to + 70°C; Humidity: To 95% non-condensing
2) Power Fully automatic 100 to 240 VAC, 50 or 60 Hertz, 5 watts; no rewiring, switching or adjustments required.
3) Weatherproof
Meets IP 55, IEC Standard. "Degrees of Protection provided by Enclosures," IEC 529.
4) Tamper-Proof
All settings are secured with a key lock and two levels of access codes. Further security is accomplished with a cabinet lock which prevents unauthorized access to physical cables, connectors and electronics.
5) Control Outputs
  Solid state switches (low voltage AC or DC) for operating external alarms and control devices.
6) Traffic Counter
   Counter tracks the number of patrons that have passed through the detector, the number of alarms and calculates alarm percentage.
7) Synchronization
     Dual channels and DSP circuitry allow several JH-33Z's to operate simultaneously in close proximity to one another.
8) Interference Suppression
     DSP built-in circuitry eliminates effects from x-ray monitors and other potential electrical interference sources.
9) Programmes
    Eighteen (18) independent programs designed to meet all installation-specific requirements including the new TSA Enhanced Metal Detector (EMD) System requirements for airports.
10) Alarms
       Audible tone and volume adjustable. Bright LED visual alarm
11) Target Pinpointing Lights
   Thirty-three distinct zones are displayed with two independent columns of LED's located on exit side of the gate.
 
Dimensions
(1)Overall sizes (mm): 2240 (height) x 900 (width) x 580(depth)
(2) Size of alley (mm): 2240 (height) x 760 (width) x 580 (depth)
 
 






 
SaveSave 33 Zones Door Frame Archway Walk Through Metal Detector


Features
 
1- Easy Assembly
JH-33Z, 33ZONE Modular design allows for a quick and easy assembly, only 4 screws to mount it.
 
2- Pinpoint detection zones
there are 33 distinct pinpoint detection zones for full target coverage on the left, centre and right side of the body from head to toe traffic lights on the entrance of the archway ,there traffic light to remind you the detector is ready for passenger.
 
3- Audible and visual alarms
there is audible alarm and visual LED lights signal when a target has been detected ,the pinpoint lights on the exit gatepost will show the location of any offending object.
 
4- Touchpad controls
The accesss control panel is designed for use by authorized personnel with specific,multi-level security codes.it allows authorized users to change settings.
 
5- Self-test
no battery is required for memory retention.while the unit is in operation,a self-test is performed , any failures or problems will be immediately reported on the LCD display
 
6- Networking ability(option accessory)
The functions of networking, remote control, monitoring, data analysis and group management all are available(see below images).


 
 
Specifications:
 1) Operating Temperatures
 -20°C to + 70°C; Humidity: To 95% non-condensing
2) Power Fully automatic 100 to 240 VAC, 50 or 60 Hertz, 5 watts; no rewiring, switching or adjustments required.
3) Weatherproof
Meets IP 55, IEC Standard. "Degrees of Protection provided by Enclosures," IEC 529.
4) Tamper-Proof
All settings are secured with a key lock and two levels of access codes. Further security is accomplished with a cabinet lock which prevents unauthorized access to physical cables, connectors and electronics.
5) Control Outputs
  Solid state switches (low voltage AC or DC) for operating external alarms and control devices.
6) Traffic Counter
   Counter tracks the number of patrons that have passed through the detector, the number of alarms and calculates alarm percentage.
7) Synchronization
     Dual channels and DSP circuitry allow several JH-33Z's to operate simultaneously in close proximity to one another.
8) Interference Suppression
     DSP built-in circuitry eliminates effects from x-ray monitors and other potential electrical interference sources.
9) Programmes
    Eighteen (18) independent programs designed to meet all installation-specific requirements including the new TSA Enhanced Metal Detector (EMD) System requirements for airports.
10) Alarms
       Audible tone and volume adjustable. Bright LED visual alarm
11) Target Pinpointing Lights
   Thirty-three distinct zones are displayed with two independent columns of LED's located on exit side of the gate.
 
Dimensions
(1)Overall sizes (mm): 2240 (height) x 900 (width) x 580(depth)
(2) Size of alley (mm): 2240 (height) x 760 (width) x 580 (depth)
 
 






 
SaveSave

Solvent extraction is a process to extract the oil from oil bearing materials by means of a solvent. A typical solvent used is hexane, a by-product of petroleum. The solvent extraction plant is designed to extract oil directly from oil seeds containing less than 20% oil, like soybeans, after flaking. Or it extracts oils from pre-pressed or fully pressed cake of seeds containing more than 20% oil like sunflowers, peanuts, cotton seed, palm kernels, canola, copra, castor and a variety of other materials.
The purpose of solvent plant extraction is to remove most of the oil contained in the seed. Extraction is conducted on prepared seeds or, as generally occurs in the case of high oil content seeds, the cake obtained from pre-pressing. Solvent extraction consists of a sequence of five operations:
Preparation of seeds for extraction which includes pre-pressing for high oil content seeds.
Extraction of oil from the prepared material with the aid of a food-grade solvent.
Desolventising-toasting of the de-oiled seed/meal, often combined with drying and cooling of the said meal.
Distillation, to remove the solvent from the extracted oil.
Recovery of solvent, which is reused again and again at the extractor level.


Simple in structure with stable performance;
Additional horizontal grid plate prevents the miscella from flowing back into the material cell to ensure the best extraction effect;
The wet meal is discharged by the material discharger which continuously discharges the wet meal onto the wet meal conveyor. This avoids meal bridging, un-uniform wet meal discharging and extends the serviceable life of the wet meal conveyor.
Composed of pre-extraction, extraction and draining sections. There is material turnover in the process of extraction to make the extraction uniform and thorough. Special self-cell solvent spraying ensures the best effect during extraction.
Features of the Solvent Extraction Process

Evaporation takes place in a vacuum for the best oil quality.
Extraction system can process different raw materials.
Solvent recovery system from vent gas is particularly absorbent.
With full energy conservation and repeat utilization, steam consumption is markedly reduced.
Solvent Extraction Plants Supplied by Yongsheng

In order to meet different clients` requirements, we have a wide range of equipment with capacities from 300 kg to 100 metric tons. When refined, oil grades may qualify as Grade 1, Grade 2, Grade 3 or Grade 4. There are two technologies: one is batch, the other is continuous. Normally we adopt batch-type processing for capacities less than 20 t/d. Otherwise the process adopted is semi-continuous or continuous.

We continue to research new equipment. Yongsheng develops equipment designed to be fully automatic, utilizing advanced technology that can be combined according to different clients` requirements. The latest refining equipment consists of many single units and has a self-contained heating system which saves energy since it does not use a boiler. This equipment requires a smaller workspace and costs less. Furthermore, it has a wider range of functions and can be used to produce Grade 1, Grade 2, Grade 3 and Grade 4 oil.

Vegetable Oil Solvent Extraction Plant Turnkey Project

Soybean Oil Solvent Extraction Turnkey Project,Palm Oil Solvent Extraction Turnkey Project,Sunflower Oil Solvent Extraction Turnkey Project,Plant Oil Solvent Extraction Turnkey Project

Dingzhou Yongsheng Grain & Oil Machinery Co.,Ltd. , http://www.oilpresschina.com