Elevator wireless monitoring transmission scheme

In recent years, with the continuous growth of China's national economy, the people’s material and cultural life is also getting higher and higher, and the quality requirements for life are constantly increasing. With the improvement of people's living quality requirements, more and more high-end living quarters have gradually entered the lives of ordinary people. The high-rise residential buildings in general high-grade residential areas are all equipped with elevators, and elevator safety is also a facility that must be configured in an upscale residential area. As the traditional elevator monitoring adopts a closed-circuit television system, the usage of domestic elevator users will increase with time. Users generally reflect the elevator video transmission line in the process of use: up and down hundreds of times a day, up and down, generally more than six months after the time, the line began to peel, and even some broken and can not be used. The replacement of this set of lines is a very complicated and time-consuming task. Therefore, when designing the elevator monitoring scheme, it is necessary to fully consider this point. Wireless transmission equipment is used to complete this project, solving the problems of complicated wiring and fatigue-prone aging of lines.

In response to this situation, our company has launched a digital wireless transmission elevator equipment: SF-5015DT. This equipment is a high-performance, multi-purpose 5GHz wireless bridge product. The product integrates 802.11n wireless with a maximum output power of up to 28dBm and is safely placed in a smartly designed housing. Powerful hardware with a 15dBi directional antenna is ideal for short-to-medium distance scenarios, ideal for elevators in this special environment.

Elevator application legend:

Use product introduction and parameters:

Model:SF-5015DT

The product has IPoll (Intelligent Dynamic Polling Protocol) anti-interference ability, even in areas with severe interference, it can still guarantee 64-bit users to access the base station equipment. The device is equipped with dual firmware images. During a remote software upgrade, even if the power supply is interrupted and the upgrade fails, the device can still be restarted normally. The rugged shell made of polycarbonate plastic contains an ultraviolet inhibitor, which ensures that the shell will not be damaged by long-term exposure to outdoor sunlight. SF-5015DT's product design and testing meet IP-65 protection level, vibration, temperature and humidity, salt spray and surge impact are in line with industry standards, with superior reliability to ensure the high-end level in the same industry. The device is equipped with a ground lug and POE power ground protection.

Product parameters:

Wireless specifications

WLAN standard

IEEE 802.11 a/n, iPoll

Transmission mode

MIMO 2x2

Wireless frequency band

5.150 - 5.850 GHz (FCC 5.745 - 5.825 GHz)

Transmit power

Up to 28 dBm (region-specific) Receive

Sensitivity

-97 ~ -75 dBm (varies depending on the modulation method)

Channel bandwidth

5,10, 20, 40 MHz

Modulation

802.11 a/n: OFDM (64-QAM, 16-QAM, QPSK, BPSK)

802.11 n: 300, 270, 240, 180, 120, 90, 60, 30 Mbps

Data rate

802.11 a: 54, 48, 36, 24, 18, 12, 9, 6 Mbps

Error correction method

FEC, selective ARQ

Duplex mode

Time division duplex

antenna

Antenna type

Integrated dual-polarization directional planar antenna

Gain

15 dBi

wired

Wired interface

10/100 Base-T, RJ45

Software parameters

Wireless mode

Access Point (Automatic WDS), Access Point (iPoll), Workstation (WDS, iPoll) Workstation (ARP NAT)

wireless technology

Intelligent dynamic polling, automatic channel selection, automatic modulation mode selection, automatic transmit power control (ATPC)

Wireless security

WPA/WPA2 Personal Encryption, WPA/WPA2 Enterprise Encryption, WACL, User Isolation

Wireless QoS

IPoll implements 4 queue priority network mode bridging, IPv4 routing, IPv6 routing network

technology

No NAT routing, NAT routing, VLAN

WLAN protocol

Static IP, DHCP Client, PPPoE Client

service

DHCP service, SNMP service, NTP client, route tracking, ping watchdog

management

HTTP(S) GUI, SSH, SNMP read, WNMS, Telnet

tool

Site Survey, Connection Test, Antenna Calibration

Physical parameters

size

140 mm (length) × 90 mm (width) × 35 mm (height)

weight

122 g

Cooling Pipe

Cooling Pipe,Cooling Tube,Plastic Cooling Pipe,Oil Cooling Tube

Cangzhou Dongjun Machinery Accessories Co., Ltd. , https://www.cablechainfactory.com