What are the requirements for no-load and load test after the cone crusher is overhauled?

The no-load test has the following requirements:

(1) Pressing the start-up procedure to start and stop, all relevant chain systems should meet the technical requirements;

(2) The moving cone rotates in the forward or reverse direction (autobiography) and should not exceed 15 revolutions per minute;

(3) The bevel gear should have no impact and periodic noise;

(4) The lubrication system works normally. The oil supply pressure should be in the range of 0.5-1.5 kg/cm2, and the return oil temperature should not exceed 50 °C (the load test should not exceed 60 °C).

(5) The hydraulic adjustment device of the hydraulic equipment shall be locked according to its operating procedure; the size of the discharge port shall be adjusted to meet the requirements for use.

(6) The normal continuous operation time should not be less than 2 hours, generally to meet the identification requirements.

The load test has the following requirements:

(1) Perform a load check on the items inspected in the no-load test run.

(2) Load test time, it is necessary to run normally for two days and nights (allow short-term parking check). The ore should be gradually increased, and the first amount should be fully loaded.

(3) The ore position should be installed correctly, and the ore should be evenly distributed in the crushing chamber.

(Iv) in the normal crusher crushing process, there should be no sharp vibration and abnormal sound.

The machine is used Heavy steel tube,

Annealing treatmaet( the structure is put in very high tempreture fire to make it more stronger), very firmly and durable

Adopt Gantry Structure, table Movement.

Wie higher precision and the structure is Morea reasonable

1.The machine is suitable for diversified and complex processing. It is widely used in 3d engraving, drilling, cutting, edging, hollowing, milling shape and so on

2. High processing speed and high efficiency.

3. High speed cnc woodworking atc center.

4. Woodworking industry: Dimensional wave board processing, cabinet doors, craft doors, paint free doors, screens, window processing mill products shaped sculpture machine

5. Also can be used in processing aluminum board, insulation board,kinds of engineering plastics, MDF,particleboard,Laminate,Solid wood panel, fairway board and others non-metal and soft metal materials.

Router Machine Spare Parts

Router Machine Spare Parts,Cnc Machine Parts,Cnc Router Machine Parts,Router Machine Slider Block

Nanjing Diding Numerical Control Technology Co.,Ltd. , https://www.dinglicncmachine.com

Posted on