The Briggs & Stratton 8 Gallon /30 Liters air compressor is designed to take on residential and do-it-yourself jobs, be it finish nailing, framing nailing, impact wrench, inflation jobs, whatsoever - it works the best. It comes with an extra powerful 1.5 HP Induction motor that produces 4.0 CFM at 90 PSI to deliver the increased performance and refill quickly. Moreover, the maintenance is a lot easier with the oil-free pump. Take this compressor anywhere with 2 rugged wheels and a collapsible handle for easy mobility and storage. Includes a 1-year warranty. Extended warranty available.
Technical Specification
Tank Size ( gallon) | 8 gallon/30 liters |
Tank shape Vertical / Hotdog / Pancake / Twin stack / Parallel / Detachable / Abnormal | Hotdog |
Running HP | 1.5 Running HP |
Cut-in/Cut-off (PSI) | 120PSI-150PSI |
CFM@40psi | 5.0 |
CFM@90psi | 4.0 |
 Motor type | Induction motor |
Oil free/lubricate | Oil-free |
Pressure gauge | 2×1.5'' |
Cord length | 6'/1.8m |
Wheels | 2× 6'' wheels |
Air filter | Iron-chrome |
Drain valve | 1 normal valve |
Life cycle(Hrs) | 300h @ 50% duty cycle |
Duty cycle % | 50% |
Noise level dB(A) 2m | ≤100 dB(A) |
Features
- 1.5 HP induction motor, Oil free
- 8-gallon/30 litres horizontal tank
- 150 max psi
- 4.8CFM@40PSI
- 3.5CFM@90PSI
- Rugged Wheels and a removable handle for easy transportation and storage.
- Pump and motor are fully shrouded for motor protection and less noise.
SpecificationsÂ
- Tank size :Â 8 gallon/30 liters
- Max PSIÂ :Â 150
- CFM @ 40 PSIÂ :4.8
- CFM @ 90 PSIÂ :3.7
- Horsepower : 1.5
- Tank Style : Horizontal
- Pump : Oil free
- Motor : Induction
- Product dimension :29.3x13.8x23.2 inch/745×350×590mmÂ
- Product weight :Â Â 50.72 lbs/23kgs
Accessories
- 6380-00, 6381-00, 6382-00, 6383-00, 6392-00, 6384-00, 6385-00, 6386-00 6387-00, 6388-00, 6389-00, 6390-00, 6379-00Â Â
Packaging Info
- Package dimensions (L x W x H) :25.8x11x24.60 inch/655x280x625mm
- Package weight : 59.54lbs/27kgs
-
The gear-type divider can separate flow into two or more paths. A gear divider consists of a housing, two or more internal sections of mating gears, and barriers that separate the sections from one another. A common shaft connects the gear sections. Flow enters one end of the housing and routes through a channel to each of the gear sections. Fluid forces act on the gear teeth, causing them to rotate in opposite directions. Fluid between the gear teeth and housing is carried around to the opposite side of the gear section. As the teeth mesh, fluid is pushed out of each outlet port.
Because all the gear sections are connected, all the gears rotate at the same speed. The positive displacements of the gear sections produce a constant division of the flow. Inlet flow is divided proportionally between each section. Even if pressures in the output circuits vary, the output flows are proportional to the input. Should the input flow vary, output flows will likewise vary proportionally. And if one output is blocked, the others are also blocked. A relief valve prevents pressure intensification.
Gear-type dividers can also be used to combine return flow in circuits. Most spool dividers are not designed to permit reverse flow.
Flow Dividers
Flow Divider,Farm Flow Dividers,Synchronous Flow Dividers,Conveyors Flow Dividers
GRH , https://www.grhcn.net