1 Year Warranty Fluid Bed Drying Machine for Pressing Tablet

Model NO.: XF
Type: Horizontal Multi-Chamber
Feeding Method: Screw Feeder
Dust Control: Bag Filter
Design and Fabrication Stds.: GB, En
Material: Stainless Steel
Trademark: ChangAo
Transport Package: Wrapping Film and Wooden Case
Specification: FCL
Origin: Changzhou, China
HS Code: 8419399090
Scope of Application:
It is suitable for drying raw materials in bulk or granule, for example, in pharnaceutical industry: medical raw materials, granule for pressing tablet, drinking medicine of Chinese traditional medicine; in chemical industry: drying and dehumidifying of plastic resin, citric acid, other powdery or granule raw materials; in foodstuff and grain process industry: drying for drinking amterial of foodstuff, maize embryo and feedstuff. In general, the diameter or raw materials will be 0.1~6mm. The best diameter will be 0.5~3mm.
1 Year Warranty Fluid Bed Drying Machine for Pressing Tablet

General Descriptions:
Boiling dryer is also called as fluidized-bed. It consists of air filter, heater, fluid bed main machine, feeder, cyclone separator, bag duster, high-pressure centrifuge fan, operation table and so on. Because the properties of raw materials are different, when dust collecting equipment is equipped, it should consider the practical needs. It can select cyclone separator and bag filter at the same time or one of them. Generally speaking, it needs to select cyclone separator only for the raw material that is heavy in specific gravity and bag filter for powdery and small granule raw materials that are light in specific gravity. Meanwhile there is a complete feeder for selection.

Principle:
Separated granule solid raw material is fed into fluidized-bed dryer through feeder. The fresh air through filtering and heating is sent to the bottom of fluidized-bed by fan and contacts with solid raw material on distributing plate. In this way the fluidized state is formed and the heat exchange between air and solid is carried out. The dried raw material is discharged from outlet and wasted gas is exhausted from the top of fluidized-bed where catches solid powder through cyclone separator and bag filter.
1 Year Warranty Fluid Bed Drying Machine for Pressing Tablet

Heat Sources:
Steam, electricity or hot air furnace can be used (it can be supplied as requested).

Technical Data:
Type Drying capacity (Kg/h) Fan Air intake temperature (º C) Material discharge temperature (º C) Heating energy consumption
Power (kw) Air pressure (Pa) Air volume (M 3 /h) Steam (kg/h) Elec. power (kW)
XF-10A 10-15 5.5 4900 2300 60-140 40-80 50 30
XF-10B 4 3800 2300
XF-20A 20-25 7.5 5000 3100 50 60
XF-20B 5.5 3500 3100
XF-30A 30-45 15 6000 4200 50 90
XF-30B 11 4700 4200
XF-50A 50-80 22 7400 6000 250 150
XF-50B 18.5 5900 6000
  
Information to Be Provided When Sending Inquiry:
Material to be dried (or chemical formula):
Moisture to be evaporated: water or solvents:
Boiling point of solvents:          ºC             (  ) received          (  ) non-received
State of material to be dried: (  ) liquid     (  ) slurry    (  ) cake    (  ) powder    (  ) others
Outputs of material to be dried (Capacity):                       kg/hr                     
Moisture content before drying:           %                    Moisture content after drying:               %
Temperature before drying               ºC Temperature after drying:                  ºC
Max. temperature of material to be dried allowed:   ≤      ºC  
Product cooling: (  ) no need         (  ) natural cooling        (  ) by surrounding air     (  ) by process air (low temp. air)
Specific heat:                   kcal/kg.ºC Coefficient of heat conducting:         kcal/m3.h
Real density of material: Bulk density of material:
Mean particle size:
Maximum particle size:                 um Minimum particle size:                    um
Material requirements of equipment:
Requirements of equipment:  (  ) explosion-proof       (  ) non-explosion-proof         (  ) others
Electrical power:  3Φ,380V,50Hz          others
Heat source:   electricity;        steam:        Mpa;            hot water:        ºC;
             conduction oil:       ºC;           hot air by gas/LPG/fuel:             ºC
Drying equipment to be suggested:
1. Hot air circulation oven               2. Vacuum dryer               3.  Fluid bed dryer
4. Spray dryer                             5. Flash dryer                  6. Mesh belt conveyor dryer     7. Rotary dum dryer                      8. Hollow paddle dryer        9. Vacuum rake dryer         10. Vibration fluid bed dryer              11. Air flow dryer
Others:

Company Profile:

Changzhou Aokai Drying Equipment Co., Ltd. was established in 2004, and is specialized in the design, manufacturing and development of the drying, calcination, cooling, crushing, mixing and granulating equipment. 
1 Year Warranty Fluid Bed Drying Machine for Pressing Tablet
The company has 4 modern standard workshops, about 13600 m2. There are 15 mid-level and senior engineers. It has more than 80 sets of processing devices and its annual production capacity can be more than 500 sets with over 30 categories. The company can provide dryer, solutions and service according to GMP, cGMP and FDA certification.

The company has obtained the certification of "National High-Tech Enterprise", been the member of China Pharmaceutical Equipment Industry Association. Also, the company has passed ISO9001:2008 Quality Management System Certification, ISO14001:2004 Environmental Management System Certification and many other certificates as well as 20 more core technologies getting patent certificates.

For a long time, the company focuses on the scientific and technological innovation, always persists in the technology upgrading as the core, and takes the optimizing of the product structure as the development direction. The company has a professional technical team to cooperate with some scientific and research institutes to develop new products, absorbs and digests advanced technologies from China and overseas, continues to explore various patent technologies to widely used in the fields of chemical, pharmaceutical, foodstuff, pigments, new materials and military industries. Aokai has already stepped into the international market and established a good reputation.

With the development, the company has accumulated strong capital and technical strength, created an intelligent and harmonious team. The company has a pilot plant with many types of testing machine for customers to do test and select suitable models.

Aokai sincerely welcome the majority of insight to make great achievement together. Also warmly welcome to Aokai.

FAQ:
1. Q: Please describe your warranty period.
    A: 15 months after the equipment is arrived at the destination port or 12 months after   the installation and commissioning of the equipment, whichever comes first.

2. Q: Do you provide on-site installation and commissioning?
    A: Yes, we do. If on request, we'll provide the guidance of on-site installation and commissioning. Usually one mechanical engineer and one electrical engineer to assist.

3. Q: How about the cost of on-site installation and commissioning guidance?
    A: The cost consists of round-trip air tickets, room and board expenses, service cost (labor cost), and site transportation (or directly provided by client), which shall be paid additionally.

4. Q: Are you a factory or a trading company?
    A: We are a professional manufacturer. We have a pilot plant for customers to do sample testing. 



 

 

Double stations Vacuum Forming Machine

Double stations vacuum forming machine applications

Double stations vacuum forming machine is adapt for PVC, PP, PET, PEGT, OPP, POF, PS, ABS etc, it can transform plastic sheets into various plastic blisters. These blisters are widely used in hardware, stationery, commodity, electronic products, health products, disposable cups etc.

It`s also suitable for the blister packaging in toys, hardware, food, electronic products, medicine, commodity and so on. 



Double Stations Vacuum Forming Machine Features

1. Double mould plates design, the heat furnace can heat to the two mold plate respectively. The working efficiency is nearly twice as fast as that of the single mould plate machine

2. 25pcs ceramic infrared heating boards which can be controlled separately, suit for different size or different thickness material.

3. 25pcs Solid state voltage regulators, control heating boards simple and visualized.

4. Large-scale cooling fan which can cool the products quickly.

5. Water-spray cooling system which suit for thick material.(optional)

6. Manual and Semi-auto style.

7. Button or pedal control available, improve the efficiency.


Double Stations  Vacuum Forming Machine




Double stations vacuum forming machine Parameters

 

Model

HX-61A

Power supply

AC380V 50/60HZ

Power

13.0KW

Max. forming size

560*610mm

Max. forming height

200mm

Speed

300~500moulds/H

Thickness of material

0.2~1.5mm

Machine size

2700*1200 *2000mm

N. weight 

1200KG


Double Stations Vacuum Forming Machine

Double Stations Vacuum Forming Machine,Double Stations Vacuum Plastic Forming Machine,Double Stations Blister Vacuum Forming Machine,Double Stations PVC Forming Machine

ShenZhen Hengxing Machinery Factory , http://www.szchxjx.com

Posted on