The project uses a limestone-gypsum wet desulfurization process and is equipped with an online continuous monitoring system for flue gas. During the construction of the project, the company conscientiously implemented the “five-system†management with the project legal person responsibility system as the core, and thoroughly summarized and learned the lessons learned from the desulfurization project under construction, overcoming the short equipment delivery cycle, the narrow construction site and tight construction period. Strictly control the safety, quality and progress of the project. On December 9, 2006, it successfully passed the 168-hour full-load trial operation. The company boldly innovates and innovates the working methods and methods, and creatively adopts the plum blossom welding lining process to solve the difficult problem of anti-corrosion treatment of the inlet flue of the absorption tower, and creates a new anti-corrosion construction process; in the design project, the participating units jointly Explore and boldly use domestically produced equipment to replace imported equipment, optimize design concepts, and accumulate valuable experience for further localization of desulfurization equipment.
By the end of 2006, all the units of the company had achieved desulfurization, and the desulfurization efficiency was over 96%, which was higher than the design value of 95%. Only one phase can reduce sulfur dioxide emissions by 18,000 tons per year, which promotes the improvement of atmospheric environmental quality.
1. Introduction of Waste Oil Distillation Plant
Vacuum Pressure Distillation,is the new technology which can refine the tire oil , plastic oil , waste engine oil, sludge, motor oil and so on into base oil(which can be made into diesel and gasoline after processed by our catalyst). The oil quality is better than the original normal pressure distillation technology, which show on purity ,transparence, lightness .this technology will do deodorization and destinke process to the raw material oil automatically by "dry type" vacuum pressure distillation method. With the vacuum distillation technology, the distillation temperature is considerably reduced, and the oil output will higher 5%-10% compared with original normal pressure distillation technology. It makes more profits to the enterprise virtually.
2. Raw material which can be used
a. Waste oil .example: waste diesel, waste oil residue etc.
b. tire/rubber oil
c. plastic oil
d. crude oil
e. waste engine oil
f. waste motor oil
g. waste lube oil
h. waste transformer oil
i. underground oil
3. Models of waste Oil Distillation Plant
4. Installation: We will be in charge of arranging our engineer to go to your place to guide the installation and train your workers how to operate the waste oil distillation plant ,and buyer will be in charge of the food, accommodation and round air tickets.
5. Exporting Experience:
|
America: |
Brazil, Canada, Colombia, USA, |
|
Middle East: |
Dubai, Iran, Jordan, Saudi Arabia, Turkey |
|
Europe: |
Albania , Bosnia and Herzegovina |
|
Asia: |
Afghanistan, India, Malaysia, Pakistan, Philippines, South Korea, Vietnam, Myanmar |
|
Africa: |
Ghana, Mozambique, Zambia |
Waste Oil Distillation Plant
Waste Oil Distillation Plant,Vacuum Oil Distillation,Waste Oil Short Path Distillation Plant,Oil Distillation Plant To Diesel
Shangqiu Sihai Energy Technology Co., Ltd , https://www.sihaienergy.com