Zl-a-Type Electric Building Lining Machine for Induction Furnace

  • Type: Rammer Compactor
  • Axle: Uniaxial Monowheel
  • Compaction Depth: 35cm
  • Travel Speed: 35cm/s
  • Certification: ISO 9001:2000
  • Trademark: Casen
  • Origin: Shandongweifang
  • Working Method: Vibration
  • Grinding Wheel Type: Slot Grind
  • Engine Type: Petrol Engine
  • Centrifugal Force: 15KN
  • Condition: New
  • Transport Package: Wooden Box Packing
  • HS Code: 8430610000

ZL-A-type Electric building lining machine for induction furnace

feature:these electric furnace building machines are designed  according to the foreign power lines ,they are mainly sold to foreign customers ,and used for small intermediate frequency electric furnace lining to knot.

Working principle:

Mainly used for dry lining materials.Depending on the vibration force produced by the motor driven eccentric wheel,the machine transmits vibration force to gravel ingredient through the furnace lining and furnace wall vibration plate,presses the gravel ingredients and moves air out of them so as to reach a high filling density.

Structure profile(Spare part)

The electric furnace building machine is composed of the vibrating body and furnace building tools.The furnace building tools include furnacebottom plate,furnace wall vibration plate,tamping fork and flat spatula.



Zl-a-Type Electric Building Lining Machine for Induction Furnace

 

 

Type

Rated Power(W)

Rated voltage(V)

Rated frequency(Hz)

Vibrationfrequency(R/min)

Rated vibration force(N)

Insulation

ZL-A

150

380V/220V three-phase

60

2900

0-2000

B-IP 65 S1 INS.CLF

 

 

The advantages and Salient features:

Advantages:

Casen electric furnace building machines use imported Italian low-power three-phase vibration motor which vibration frequency is 2900 rev/min,frequency 50HZ and vibration force1000-2000N that can reach at least 0.3~0.5MPa pressure.To enable workers to operate easily,all the motors are required to use aluminum shell,so the weight is lighter and the knot of furnace lining is stronger and more durable.They can not only move up and down,but also do movements of local turn and bias in the furnace.

Features:

All the persons who use and are familiar with intermediate frequency electric furnace machine know that the original furnace 's lining knot are done by workers.This process needs at least four or five workers.And it takes about 12 hours to tie it comparatively stronger.

The emergence of electric furnace building machines solves this problem.And compares to artificial knot,electric furnace building machine has the following obvious advantages:it only needs one or two workers to make furnace lining and greatly shortens the building time.The average useful life of the machines could be raised by 10%,and even 15%-20% if the operators have rich experience,and making the lining,1-2 people can do it.And greatly shorten the furnace building time,average life expectancy increased by 10%.If experienced the work efficiency can be increased by 15%-20%.

Zl-a-Type Electric Building Lining Machine for Induction Furnace
Zl-a-Type Electric Building Lining Machine for Induction Furnace
 

 


Packaging & Shipping

 

Delivery:

Usually delivered by sea shipment container or trucks.

 

 

Granular Net Gas Granular Activated Carbon

Granular Net Gas Granular Activated Carbon,Granular Activated Carbon,Irregular Broken Carbon,Small Particles Activated Carbon

Shanxi Xinhui Activated Carbon Co.,Ltd. , https://www.adsorbac.com

Posted on