- Model NO.: Rubber screw barrel
- Trademark: ZHONGYANG
- Origin: Zhejiang of China
- Screw Barrel: Rubber Machine Screw Barrel
- Specification: ISO9001: 2008 approved
- HS Code: 84779000
Specification:
Diameter of pin screw and barrel: Φ 75mm-Φ 200mm
Diameter of cold feed or hot feed screw and barrel: Φ 30mm-Φ 300 mm
L/D ratio: 12-18
Technical Information
Base Materials:
1). 38CrMoAlA(JIS SACM645).
2). 42CrMo(AISI 4140).
3). 4Cr5MoSi V1 (JIS SKD-61).
4). 9Cr18MOV
5). HPT
Bimetallic alloy materials:
1). Fe-based alloy
2). Ni-based alloy/Deloro alloy
3). Co-based alloy
4). NiCo-based alloy
5). Tungsten carbide/Wolfram carbide
Technics:
Heat treatment
High-frequency quenching
Nitriding treatment
Hard-chrome electroplating
Bimetallic alloy welding
Bimetallic alloy centrifugal casting
Technical parameter:
Nitrided layer depth: 0.5-0.8mm
Nitrided hardness: 900-1000HV
Nitrided brittleness: Less than grade 1
Surface roughness: Ra0.4
Linearity of screw: 0.015mm
Hard-chrome plating hardness after nitriding: >=950HV
Chrome-plating layer depth: 0.025-0.085mm
Bimetallic layer depth: 3mm
Warranty and service: 1 year
Our advantages:
1). Excellent raw materials
2). Good customer service
3). Rapid delivery
4). Reasonable price
5). Production quickly
Experienced manufacture, we will be the best choice.
|
Technical Parameter For Extruder Machine | |
| Base Material | 1)38CrMoAlA(JIS SACM645);2)Cr12MOV(JIS SKD-11)Â ; 3)4Cr5MoSiV1(JIS SKD-61)Â ;4)42CrMo(AISI 4140)Â |
| Bimetallic Alloy Materials | 1)Fe-based alloy 2)Ni-based alloy/Deloro alloy 3)Co-based alloy 4)NiCo-based alloy 5)Tungsten carbide/Wolfram carbide |
| Double-alloy level | Level A - containing Tungsten of 40% Level B - containing tungsten of 25% Level C - containing tungsten of 9.5% |
| Surface Treatment | Heat Treatment High Frequency Treatment Nitriding treatment(120 Hours): Depth of Nitrided Layer: 0.5-0.8 mm Hardness of Nitrided Layer: 900-1020Hv (HRC56°-65°) Hard Chrome Plating treatment: Thickness of Hard Chrome Plating Layer: 0.05-0.10mm Hardness of Hard Chrome Plating Layer: ≥ 950HV Nickel alloy plating.treatment: Bimetallic Barrel/Cylinder: Centrifugal Casting (Inlay Alloy) Bimetallic Screw: Plasma Alloy Coating Spraying Depth of Bimetallic Layer: >2mm Hardness of Bimetallic Layer: HRC55°-72° Spraying corrosion wear-resisting dual metal layers |
| Basic information | Roughness of the surface:Ra0.4um Linearity of the screw: ≤ 0.015mm Linear axis limit: ≤ 0.02mm Hardness after Hardening & Tempering: HB240-280 Fragility of Nitration: ≤ Two class |
| Material Application | 1)General Plastics 2)ABS,PA,PC,PE,PET,PP,PS,EVA,PU,PVC,U-PVC,etc 3)PA + GF(Glass Fiber) 4)Flame-resistant Reinforced Plastics 5)Modified Engineering Plastics 6)All kinds of Mixed Recycled Material(in Scrap or Granule), PVC + 30% CaCo3, etc |
AVIC EXCELLENCE FORGING is a member and the only forging processing center in east China of AVICHM.We are the professional manufacturer of special shaped ring forgings in China.
We can provide customized service to customers with all kinds of seamless rolled rings, includes:carbon steel forging, alloy steel forging, stainless steel forging, aluminium forging, titanium alloy forging, and super alloy forging.
Our ring forging products are applied to petrochemical equipment,Wind power equipment, nuclear power equipment and other new energy equipment,ocean engineering equipment, mechanized equipment, oil and gas equipment, gas turbine engine, aerospace and military project.
Covers kinds of products:Flange,tube sheet, wind power flange and bearing,gear ring,slewing bearing,yaw pitch bearing, forged rim and so on.We can produce all kinds of high cylinder forging, wide thickness seamless rolled ring, the outer diameter of rolled rings from 600mm to 9000mm,and the height can be reach 1500mm.
AVIC EXCELLENCE FORGING have two forging lines, one line equipped 4000 tons hydraulic pressure machine and OD6300mm rolled ring machine, another line equipped 5000 tons oil pressure machine and OD9000 mm rolled ring machine. The annual capacity of forging manufacture is 60000 tons . We also have over ten sets all kinds of heat treatment furnaces, and could do normalizing, annealing, quenching, tempering, aging, solid solution and so on. The outer diameter of biggest furnace is 8500mm.
AVIC EXCELLENCE FORGING also have over ten sets different size vertical lathes, from 1.6 m to 8 m.At the same time, AVIC Excellence Testing Center is the only testing center of AVIC Metal Test Technology Co. Ltd. a third party service platform of AVIC Industry, very important. And, it is an experienced, capable and highly qualified state-level third party testing platform. We have equipped SPECTRO direct-reading spectrometer, high temperature tensile tester, low temperature impact tester, hardness tester, metallographic testing equipment, ultrasonic fault detector and other Physical and chemical inspection analysis equipment.
AVIC EXCELLENCE FORGING has obtained the ISO9001, IS14001, AS9100, PED, different kinds of classification society certificate, such as CCS, ABS, DNV GL, LR, BV, RINA. At the same time, the establishment of a strict and scientific management system provides the high quality of products.
AVIC EXCELLENCE FORGING relies on the high quality products and thoughtful service to win the trust of the market and the establishment of a lasting relationship with customers.As so far, the company has pioneered in the United States, Brazil, Germany, Belgium, Russia, Turkey, Australia, India, Singapore, South Korea, durban, represented by regional markets such as Europe, America, Oceania, southeast Asia, South Africa.
AVIC EXCELLENCE FORGING is willing to cooperate sincerely with friends from home and abroad, and establish the lasting and mutual trust relations of cooperation,and make brilliant innovation together in future.
Forgings For Aviation,Gear Shaft For Aircraft Engine,Alloy Aluminium For Aerospace,Aerospace Turbine Forging
AVIC EXCELLENCE FORGING (WUXI) CO.,LTD. , https://www.avicforging.com