TC2500 PSI, TC3000 PSI, TC3500 psi, tie-rod cylinder is designed to provide outstanding performance in a variety of applications. Including:
Agricultural implements,
Compact construction.
Transportation equipment,
Waste/recycling applications.
The base end clevis extends out 2 inches for greater swing ability on applications.
SAE O-ring ports for easy hookup.
The base end clevis has been extended to 2" for greater swing ability. Â
Key Features
Intended Use: Double-acting applications
• Piston: Ductile iron
• Gland: Ductile iron, drilled oil passages
• Tube: Precision honed steel
• Rod: Hard chrome plated
• End Mounts: Ductile iron female clevises with pins and clips included
• Tube Seals: Buna O-ring
• Rod Seal: Deep polypak with B lip design
• Rod Wiper: Urethane, snap-in
• Piston Seal: Hallite 755 for prolonged wear resistance with wear ring
•Ports: NPT Â
• Paint: Black. Custom colors are available
• Packaging: Individually poly bagged
 Tie Rod Hydraulic Cylinders
TC2500 PSI, TC3000 PSI, TC3500 psi, tie-rod cylinder is designed to provide outstanding performance in a variety of applications. Including:
Agricultural implements,
Compact construction.
Transportation equipment,
Waste/recycling applications.
The base end clevis extends out 2 inches for greater swing ability on applications.
SAE O-ring ports for easy hookup.
The base end clevis has been extended to 2" for greater swing ability. Â
Key Features
Intended Use: Double-acting applications
• Piston: Ductile iron
• Gland: Ductile iron, drilled oil passages
• Tube: Precision honed steel
• Rod: Hard chrome plated
• End Mounts: Ductile iron female clevises with pins and clips included
• Tube Seals: Buna O-ring
• Rod Seal: Deep polypak with B lip design
• Rod Wiper: Urethane, snap-in
• Piston Seal: Hallite 755 for prolonged wear resistance with wear ring
•Ports: NPT Â
• Paint: Black. Custom colors are available
• Packaging: Individually poly bagged
Â
Machining Stainless steel is the use of CNC machining out, including drilling, boring, cutting, turning, screw, etc.. Machining stainless steel commonly used materials: sus303304316.stainless steel has a very high hardness after machining, easy deformation, so in the process of rough machining to eliminate stress, and then finished. Surface treatment is generally passivation, we have specialized laboratories to test products, and ensure that each size to meet the requirements of the drawings, including the machining stainless steel application in various industries: automobile, ship, crane, medical equipment, industrial automation equipment.
Of course,we also accept the custom machining,welcome to contact us.
Machining Stainless Steel,High Precision Machining Stainless Steel,Cnc Machining Stainless Steel,Stainless Steel Machining,Steel Machining
Hong Kong RYH CO., LTD , https://www.szcncmachiningparts.com