Model NO.: 825-76-18 and 840-210-25
Control System: PLC Control and Manual Control
Roller Material: No.45 Forged Steel with 0.05mm Chromium
Shaft Diameterl: 75mm
Forming Steps: 15 Rows and 13 Rows or as Panel Drawing
Quality Gurantee: One Yaer
Forming Speed: 8-12m/Min
Trademark: DIXIN
Transport Package: Waterproof Package
Specification: 825-76-18; 840-210-25
Origin: China, Hebei
HS Code: 84552210
                                    Double Layer Roll Forming Machine line1.Machine picture,parameters&advantages
Whole line:
Three parts: Uncoiler+ Roll forming&cutting+Collection table
Technique parameters
| (1) Processing material | aluzinc/galvanized steel/colored steel coil |
| (2) Material thickness | 0.25-0.75mm |
| (3) Effective width | 840mm |
| (4) Feeding width | 1000mm |
| (5) Main motor power | 4 kw |
| (6) Pump power | 4 kw |
| (7) Shaft diameter | 75mm |
| (8) Forming steps | up level 11Â steps wall profile;Â down level 13 steps for roof |
| (9) Roller material | 45# forged steel, with hard chrome plating |
| (10) Main frame | 300H steel |
| (11) Medium plate thickness | 16mm |
| (12) Control system | PLC computer control with inverter |
(14) Overal sized: 7500mm*1500mm*1500mm
Advantage:
| (1)Forming thickness | 0.25-0.75mm |
| (2)Forming steps | Uper layer:11Â roll stations.75mm shaft, down layer 13Â roll stations |
| (3)Hydraulic mould cutting | |
| (4)Export this kind double layer machine to many countries. | |
| (5)Delta PLC fully automatic control system | |
| (6)CE,BV,TUV,CO and other requirement available | |
Factory machine and office
+86 18231737651
Â
Shanghai Mengtenali Drive Equipment Co.,Ltd , http://www.monadrive.com