J45Fs DC Fluorine Plastic Globe Valves, designed to control highly corrosive media with a variety of fluoroplastics on the surface of the body cavity for different operating temperatures and fluid lines. High strength, good corrosion resistance. Straight through lined with fluorine valve manufacturing and standards Design and manufacture: GB12235 Structure length: GB12221 (1 series) Flange connection size: GB4216 JB78 Straight-through fluorine valve material: Body, bonnet: HT200, ZG230-450, ZG1Cr18Ni9Ti Spool: 1Cr18Ni9Ti, Division TiLai alloy surfacing, enhanced PTFE Packing: PTFE, flexible graphite, stainless steel bellows Putter, bushing: 2Cr13 Gasket: rubber asbestos board, 1Cr18Ni9Ti, graphite spiral wound gasket Drive mode: manual, electric, pneumatic Suitable temperature: ≤80 ℃, ≤100 ℃, ≤120 ℃, ≤150 ℃, (according to lining material) Pressure rating: 0.6,1.0,1.6 test Lining: Spark detection Experiment and test according to GB / T13927 standard Nominal pressure: PN Body: PN × 1.5 Seal: PN × 1.1 J45Fs DC Fluorine Plastic Globe Valve Parts List: 1, body, 2, body lining 3, valve cover 4, valve 5, cap 6, stem 7, hand wheel J45Fs DC Fluorine plastic globe valve Dimensions: Nominal diameter Nominal pressure Work pressure L D D1 n-Фd f H1 H2 D0 quality 25 1.6 1.0 1.6 160 100 75 4-2 2 2595 280 120 4.5 32 200 120 90 4-14 2 140 13 40 200 130 100 4-14 3 320 353 140 9.5 50 230 140 110 4-14 3 342 375 160 16.5 65 1.0 290 160 130 4-14 3 180 80 310 190 150 4-18 3 467 520 200 32 100 350 210 170 4-18 3 532 600 280 45 125 400 240 200 8-18 3 604 685 280 67 150 480 265 225 8-18 3 635 728 320 89 200 0.6 495 320 280 8-18 4 735 866 400 145 250 622 375 335 12-18 4 300 698 4 ã€Print】 ã€Close】