Most of the electric lift trucks are used with high-altitude aerial vehicles. They can make the working range of aerial work vehicles wider, and at the same time allow more people to perform high-altitude operations at the same time, provide operational efficiency, and further improve the supportability of high-altitude operations. . But all the advantages of electric lift trucks are based on the premise of establishing its standard operation. Then how does the electric lift truck operate? Xiaobian introduces you to relevant knowledge.
Electric lifting platform car operation steps
1. The electric lift truck is tested and tested before leaving the factory. It is determined that each product coefficient, index, etc. are in compliance with the relevant standards. The driver can directly use it after buying it, and it is not necessary to adjust or change it.
2. Before using the electric lift truck, it is necessary to check the electrical system, hydraulic system, etc., to confirm that they are not used in the case of bare drain or leakage.
3. Use electric lifts to open all four legs, and firmly support them on a solid ground to ensure that they can withstand the gravity of work at heights, and to ensure that the movable openings at both ends of the guardrail are It is completely locked up so that it can begin work.
4. Before the manned operation, it is necessary to try the operation function of the electric lift truck first. It is better to try several times to ensure that there is no problem and then start the load operation.
5. When working on the load, be able to focus on the center of the electric lift platform.
6. When using the electric lift truck manual pump, it is necessary to tighten the oil valve knob clockwise, and then push the hand-operated valve handle from the start to the position of gravity, press the handle platform to lift; It is also necessary to release the oil return valve in the opposite direction and then lower it again.
How electric lift truck operators? Electric lift trucks must be legal, compliance operations, driving an electric lift trucks people need to understand the relevant operational knowledge and be able to actually use them, to be able to ensure that any security is not an accident operation of electric lift trucks process.
The non-standard flange is also called custom flange,it means the flange is not as per the international standard of flanges. Commonly it is designed for special application.
Non-Standard Flange,Non Standard Flange,Non-Standard Stainless Steel Flange,Non-Standard Flange Customization
Fuyuan Marine Accessories Co., Ltd , https://www.fuyuanmarineparts.com