Yangzhou Shengfeng Power Equipment Factory / 2018-10-27
The starting battery of the diesel generator set is also of various brands and types. The type of battery that the unit starts to start is also difficult to enumerate. In order to increase everyone's understanding of the starting battery of the diesel generator set, the following is summarized:
1, no load type:
The load-free starting battery storage period is in a state of no charge, and the battery has no electro-hydraulic. When using, add electrolyte and charge it before use. Ordinary lead-acid batteries are uncharged batteries.
2, dry type:
Its full name is a dry-charged lead-acid battery. Its main feature is that the negative plate has a high storage capacity. In a completely dry state, it can store the generated electricity in a two-year storage period. The lead-acid battery has been activated at the factory. When it is used, it only needs to be filled with standard density electrolyte. After 20-30 minutes, it can be fully used to start the diesel generator set.
3, wet load type:
A battery in which the plates are wet during storage and maintains their chargeability is called a wet-charge activated battery. The process of wet-charged batteries is slightly different than that of dry-type rechargeable batteries, and the time for storage and charging is also shorter.
During the storage period (about 6 months), the wet-charged battery can be used by filling the standard density electrolyte to the specified height. The first discharge can reach 80% of the rated capacity. The wet-charged battery with a storage period of about one year is discharged immediately after the electrolyte is filled, and 50% of the rated capacity can be released. The wet charge battery can be recharged before use to reach the rated capacity. The wet-charged battery is suitable for applications that do not require long-term storage.
4, poor liquid type:
This type of battery is called a valve-regulated sealed lead-acid battery, and the English mark is VRLA. The internal electrolyte is adsorbed on the diaphragm and the plate, and the diaphragm is saturated at 90%. There is no free electrolyte inside, no electrolyte overflow, no need to add a blending electrolyte, and any position can be used. This battery is a maintenance-free battery.
5, with liquid type:
During the storage period, the battery is charged with electrolyte and is in a state of charge.
6, rich liquid type:
The rich liquid type is relatively lean type, that is, there is a large amount of acid water in the battery. Also known as "rich liquid lead-acid battery."
Stainless steel thick-film heating tubes of GIDAPE®ANDETONG® series manufactured by JIEDA company are tubular structures, which allows rapid water flow and instant heat carrying. Under the same conditions, GIDAPE® ANDETONG® series has many application advantages, such as large heating area, high heat conduction efficiency (≥98%), rapid thermal response (≥80 ℃~150℃/S), long working life (≥10000 hours), etc.
JIEDA 2200W Thick Film Heating Element consists of stainless steel thick-film heating pipe, outer protective shell, water inlet and outlet joints, anti-dry thermostat, power cord, etc. It can be fixed on sides, with 10mm and G1/8 diameter connecting orifice.
This type of heating body is an intelligent temperature control thick film heating body. It can work with the PCB circuit control system, so that the pre-set temperature and hot water quantity can be decided.
At present, thick film heating tube(heating body) of GIDAPE®ANDETONG® series has been successfully applied to fluid heating field, such as: Instant Hot Water dispenser, quick hot water boiler, pipeline machine, electric heat faucet, kitchen under sink water heater, sous vide, dishwasher, milk machine, coffee machine, dishing industrial equipment and so on.
2200W Eelectric Heating Element
2200W Eelectric Heating Element,Industrial Heating Elements,Electric Furnace Heating Element,Dryer Heating Element
XINXIANG JIEDA PRECISION ELECTRONICS CO.,LTD , https://www.tubularheater.de