Wenbo Security: These three mistakes often appear in the design of electronic patrol system

In actual use, the electronic patrol system is understood as an offline patrol system. This is a narrow understanding. There are two types of electronic patrol systems: online and offline. The offline market has a high market share, mainly due to simple deployment, Good quality and low price; many items in the security design are a list of equipment configuration, no other content. The main reason is that many designers have not had a thorough understanding of this piece, and are not familiar with the design? How to do it? Only some mistaken designs will appear.

Mistake 1: Offline electronic patrol system is not designed with communication equipment

In the latest national security engineering standard "GB50348-2018 Security Protection Engineering Technical Standard", there are such requirements for the electronic inspection system:

6.4.14 The design content of the electronic patrol system should include patrol line settings, patrol alarm settings, patrol status monitoring, statistical reports, linkage, etc., and should meet the following requirements: 1 It should be possible to set the patrol line trajectory, time, and patrol personnel, should Multiple concurrent lines can be set; 2 should be able to set rules for abnormal alarms for inspection; 3 should be able to monitor and record the status of personnel's inspection activities in the pre-set online inspection route; it should be able to report to the police in time when an unexpected situation occurs; 4 The system can make statistics on the setting content and inspection activities to form a report.

The above content requires that the electronic patrol system should be able to report to the police in time when an unexpected situation occurs when the patrol personnel perform the patrol activities;

The patrol personnel of the offline electronic patrol system cannot perform status monitoring when performing the patrol task. If an accident occurs, it may not be known. Therefore, it is necessary to design an instant messaging system. It can be said that the two are considered together and designed simultaneously.

There are many instant messaging systems, and some people can say that patrollers can carry their mobile phones with them and they can contact them, but ordinary mobile phones do not have a timely contact function and an emergency alarm function and cannot replace this purpose.

Treatment method: Under normal circumstances, the most used and most affordable is the wireless intercom. Each patrol person wears one, and the intercom half-duplex communication mode. If there is an emergency, the same channel personnel can learn the situation and deal with it. high efficiency.

Mistake 2: Electronic patrol route and alarm system conflict prevention

The design of the patrol route of the electronic patrol system is often considered unilaterally, only considering the focus and convenience of patrol; in some important locations, the alarm system is also equipped with a zone detector, and the design of the patrol point of the electronic patrol system is also taken into account. An embodiment of strong protection, but it ignores the problems when the two systems work.

Electronic patrol and alarm systems are often important preventive measures at night. After the night alarm system is deployed, patrol personnel also start to work according to the route set in advance, but the problem comes when the patrol personnel pass through the defense area of ​​the alarm system. Alarm, causing frequent false alarms of the system,

This caused a lot of trouble to the security personnel on duty and the operation of the system. This is "the big water rushed to the Longwang Temple, and the family does not recognize the family." The electronic protection system certainly does not recognize it. Disposal methods: During project design or construction, Circumvention measures can be taken, such as setting the zone as a delayed zone, or arming by zone, and then modifying the patrol route, etc.

Mistake 3: Independent design of online electronic patrol system

In the design of electronic patrol system, the independent construction of online patrol system is definitely the best choice, but for the "online" design, it is necessary to establish a signal transmission system separately, each patrol point needs to be connected to the center, which is not only troublesome, but also The cost of the project has increased; this is obviously not an optimal solution. We all do money when we do projects, so don’t waste it here.

Disposal method: the online electronic patrol system can be jointly constructed with the entrance and exit control equipment and intrusion alarm system, which can also realize the integrated management of the system, and such products have mature cases in the market, and it is very convenient to use, and some even Linkage video surveillance system, follow the patrol personnel for dynamic real-time supervision.

Conclusion

The electronic inspection system is not only easy to use, but also can supervise and manage the work of security personnel. It is widely used in security systems. Units with certain capabilities can even build by themselves. With the continuous development of technology, wireless inspection systems and mobile inspections have appeared. System, which is the trend of technological change and a combination of civil air defense and technical defense. Advances in science and technology will bring new developments to security precautions and new requirements for the security engineering construction of Wenbo system. These All are to protect the objects more safely.