Brief Introduction:
TONVA has rich experience to design various reheat stretch blow moulding equipments. After years of R&D, now we introduce the latest economical stretch blow moulding machine to the market. The FA is an economic two stage automatic stretch blow moulding machine, which is mainly designed for the PETÂ stretch blow bottles. The FA consumes less power due to optimized machine layouts and patented perform heating system, so the end of user can achieve maximum profit in today's competitive bottle moulding market.
5000ML 2 Cavities Automatic PET Stretch Blow Molding Machine
Â
FA-5000-2 Basic Specification:
PET preform loading automatic;
Auto-fault detection;Slider type: 33pcs of slider in total;
16pcs of heating lamp;
Container volume: up to 5000ml;
Bottle neck range: 14mm - 45mm;
Output (Bottle per hour): 2-cavity:around 1100.
FA-5000-2 Working Condition:
Power supply: 380VAC/50Hz(depending on client's country)
High pressure: 2.4m3/min, 3.0Mpa
Low pressure: 2.0m3/min, 1.0Mpa
Air dryer+Filter: 3.0m3/min, 3.0Mpa
Air tank: 1.0m3/min, 3.0Mpa
Water chiller: 5HP
Technical Specification:
5000ML full automatic pet stretch blow molding machine | |||
Category |
Item |
Unit |
FA-5000-2 |
Â
Â
Â
Product specification
|
Max volume |
ML |
5000 |
Output |
pcs |
1100 |
|
Body diameter |
mm |
200 |
|
Bottle height |
mm |
350 |
|
Neck diameter |
mm |
14-45 |
|
Â
Â
Â
Mold
|
Cavity |
cavity |
2 |
Clamping stroke |
mm |
220 |
|
Max Strtch stroke |
mm |
450 |
|
Bottom Moving stroke |
mm |
60 |
|
Â
Â
Power
|
Votage standard |
-- |
220/380/415V 50/60 HZ
3 phase
|
Total power |
kw |
38 |
|
Â
Â
Â
Â
Air source
|
HP air compressor |
-- |
2.4 M3/min 3.0 Mpa
|
LP air compressor |
-- |
2.0 M3/min 1.0 Mpa
|
|
Air tank |
-- |
1.0 M3/min 3.0 Mpa
|
|
Air dryer+Filter |
-- |
3.0 M3/min 3.0 Mpa
|
|
Â
Â
Machine specification
|
Machine(L×W×H) |
m |
3.4*2.6*2.0 |
Machine weight |
kg |
3200 |
|
Preform loader(L×W×H) |
m |
2.0*1.0*2.4 |
|
Loader weight |
kg |
250 |
|
Main Features
1) This machine is suitable for making mineral water bottles,carbonated beverage bottles, daily chemical bottles ,oil bottles etc less than 5000ML.
2) Use the advanced touch-screen computer control ,easy operation,stable quality and high safety.
3) Use the electric appliances and pneumatic components of worldwide famous brands, stable and accurate velocity.
4) The whole production process is finished by the automatic micro-computerized control, auto-fault detection,automatic alarm , each action has interlocking device as a security guarantee.
5) The gas circuit is designed into low-pressure and high-pressure twice blowing and action three portions,making sure of an even bottle forming and blowing a steady action.
6) The blower is reasonably designed ,smooth running ,with the production workmanship flow fully automatic,and holds less investment,high efficiency ,easy operation,simple repair, safety etc.
7) Advanced match mould structure , stable running ,powerful mould locking strength.
Detailed
Controller System
The new microprocessor has more storage memory;it saves the operating setting up to 30sets.Re-programmed software detects any possible errors permitting immediate identification and diagnosis of the problems.
Preform Feed
The preform shocked in the hopper are transported by conveyor and are sorted neck upwards for the feed ramp in to the preform oven automatically,the performs are now read to enter the oven equipped with its infra-lamps.
Blowing Station
Improved blow station fits with the blowing molds up to 2.5L.Thanks to the compensation unit,the new speedy clamping system allow you to blowing the bottles with pressure up to 40Bar with perfect parting line on the bottles/And another major benefit is the fast mold changing over time.
Linear Transport Oven
The heating of the performs is optimized by the new modular oven with 9layers of heating lamps.It guarantees the ideal temperature for quality blowing.The preform self rotated by frictional belts during the continuous movement.Due to the small gaps between the preforms ,it requires less electric costs.We called as economic running.
* Reply the email and take action in 24 hours.
* 100% Quality inspection before the shipment.
* Can training clients operator for free in seller's factory.
* Engineer overseas is available.
* Blowing mold and injection mold made original.
* Auxiliary machines for complete line.
* Customized design as requirements.
1,Instruction for Installation and Debugging:
Before delivery, YAOVA takes responsiblity for debugging of machine, in order to make sure provided machine could be safely and smoothly put into operation.
YAOVA also take responsiblity to have debugging overseas, and clients aborad please first send invitation,then provide our engineer with round-trip tickets,accommodation,vehicle and USD80 per day for salary.
2,User Training:
Before delivery,YAOVA will take responsibility to indoctrinate technical training to the users so that they could understand machines' features and could operate the machine by themselves.
3,Warranty Period:
The waranty period for YAOVA machine is one year with a life long maintenance. If the user requires special quality guarantee, other stipulated warranty period may be made after mutual agreement.
We are manufacturer of Condensing Unit in China, if you want to buy R404 Condensing Unit,Air Cooled Screw Chiller,Scroll Condensing Unit please contact us.
The compressor power is from 1hp to 30hp.It is designed as thin-wall type , which is suitable for both wall hanging and floor standing installation;All the fans are axial fans ,which is easy for installation and maintenance ,with stable operation and low noise.
Screw Unit
4 Hp Condensing Unit,R404 Condensing Unit,Air Cooled Screw Chiller,Scroll Condensing Unit
Zhejiang Diya Refrigeration Equipment Co.,LTD. , https://www.diyarefrigeration.com