China-Angle-Storm-Valve


JIS Marine Valve 

18 months warranty 
Fastest delivery in 15 days

JIS Marine Valve
1. JIS Marine Valve Applicable Scope:
The products are used for preventing refluence in fuel oil piping,
lubricating oil piping and water piping at temperatures 205ºC or less.
Dimensions of flange are according to JIS B2220 flange dimensions of steel pipe.

2. JIS Marine Valve Material of Major Parts:
 
Parts Material
Name Grads&Standard No
Body Cast steel ZG230-450
Bonnet
Disc Stainless steel 2Cr13, SUS304
Seat ring
Stem
Packing Flexible graphite  

3. JIS Marine valve Capability:
Nominal Pressure Max  5kgf/cm²(0.49Mpa)
Seal Pressure Max  7.7kgf/cm²(0.761Mpa)
Intensity Pressure Max 10.5kgf/cm²(1.03Mpa)
 
Medium Max Pressure kgf/cm²(Mpa)
Steam<205ºC 5(0.49)
Air&Gas
Oil&Flow water
Lenitic Water<120ºC 7(0.69)

Drawings

 


Marine Cast Steel Angle Valve JIS F7312 5K 
Marine Cast Steel Screw Down Non-return (Check Valve) Angle Valve JIS F7312 5K 

Main Dimension

 
DN Out-form dimension Connection dimension of flang Weight
L H D2 D C T n-d kg
50 100 240 160 130 105 16 4-15 12.9
65 115 255 180 155 130 18 4-15 18.2
80 130 265 180 180 145 418 4-19 23.4
100 150 310 224 200 165 20 8-19 33.7
125 170 330 250 235 200 20 8-19 46.2
150 190 380 280 265 230 22 8-19 63.4
200 220 450 315 320 280 24 8-23 105
250 275 540 355 385 345 26 12-23 178
300 310 610 400 430 390 28 12-23 275
 


Jiangsu Xingya Marine Valve Co., Ltd. located in Industrial Park, Xingtai Town, Jiangya, Taizhou City, Jiangsu Province was founded in 1993, specialized in producing all kinds of copper, iron, steel and stainless steel marine valves, piping accessories, which are accord with the JIS, DIN, ANSI, GB, CB or CBM standards or rules. Products are manufactured from the blank to end product with excellent manufacturing facilities and mature process, and the quality management system of company is sound and detection means are complete. 

We stick to the principle of "quality first, service first, continuous improvement and innovation to satisfy the customers" for the management and "zero defect, zero complaints" as the quality objective.

 

Using the technology of silk-screen printing and high temperature sintering, the surface of stainless steel tube was covered in order by sinter dielectric layer, resistance layer, silver conductor layer and isolation glazes protective layer.




The  major series is SUS 430 and 444 as substrate, which is  covered by thick film.
The diameter range is φ10mm-φ85mm, length is from 110mm to 262mm, the maximum power is 6KW per tube.
Standard product is in stock.  And customized product for special power, voltage and other requirement is available.

1S0A8915



GIDAPE® ANDETONG® series stainless steel Thick Film Heating Tube has the following characteristics:
1, Safe and durable high strength: stainless steel substrate, Multi-layer microcrystalline vitreous insulation.
2, Fast heating: heating circuit has temperature rise over 80~150 degrees per second.
3, High utilization rate of heat: directly rapid-heat stainless steel tube, a big heat exchange area, fast replacement, efficiency up to above 98%.
4, Green and environmental protection: pure resistive load, no electromagnetic radiation, good for human body and mind.
5, Special tubular heating structure not only provides a great convenience for special application areas, but also provides an irreplaceable condition for the development of new products.

6, Customized services: we tailor-make electric heat products and provide application solutions for enterprises.




Those new types Thick Film Heater Tubes are special designed for Through-Flow applications, such as Instant Hot Water dispensers, instant water heaters, instant coffee maker, electric heating water faucet, instant water flow heater under sink, industrial water flow heater...


Thick Film Heating Tube

Thick Film Heating Tube,Heating Tube,Radiant Tube Heaters ,Infrared Tube Heater

XINXIANG JIEDA PRECISION ELECTRONICS CO.,LTD , https://www.tubularheater.de

Posted on