75-I, rotating type
75-II, pulling type
75-II type pulling counter used in accumulating record apparatus or mechanic Rotating movement frequency, joining the subsidy boom, apparatus and machinery Of the counter to pulling count. The number direct shows and having the rotate Zero reset, after zero reset, still begin from zero to accumulate. 75-II type Pulling counter main used in textile, machinery, mine, big- pressing and transporting etc.
Technical parameters:
Digital specification (mm): 4.4X2 height X width 4.4X2 4.4X3
Max calculated capacity 00000--99999 Transmission, ratio 1: 1 Torque 8NGm Traveling angle(right axle right pendulum) 38--43 C Calculating speed 500/s Weight About 80G Reset mode Thumb-operated.
Plastic Injection Insert Molding
1. The combination of the easiness of molding and bending of resin and the rigidity, strength and heat resistance of metal can make complex and sophisticated metal-plastic integrated products sturdily.
2. In particular, the combination of the insulation of resin and the electrical properties of metal can meet the basic functions of electrical products.
3. The pre-forming combination of multiple inserts makes the post-engineering of product unit combination more reasonable.
4. Insert products are not limited to metal, but also cloth, paper, wire, plastic, glass, wood, wire ring, electrical parts and so on.
5. For rigid parts and flexible parts on rubber sealing pad, the complex operation of arranging sealing ring can be eliminated after the integrated products are made by injection molding on the matrix, which makes the automatic combination of the following process easier.
6. Because it is the fusion of molten material and metal insert, compared with the pressing molding method, the metal insert gap can be designed to be narrower, and the reliability of composite product molding is higher.
7. Suitable resin and molding conditions may be used for sealing and fixation of susceptible products such as glass, coils, electrical parts, etc.
8. Inserts can also be completely sealed into the resin by selecting the appropriate mold construction.
9. After the insert is molded, it can also be made into a product with hollow grooves along with the core hole.
10. The combination of vertical injection molding machine and manipulator, the whole row device of insert products, etc., the insert forming engineering can be mostly automated production.
Plastic Injection Insert Molding,Washing Machine Plastic Injection Moulds,Plastic Injection Molding,Plastic Injection Molding Machine
Suzhou Dongye Precision Molding Co.,Ltd. , https://www.sjdongye.com