General
Transformer radiator fin forming & welding line, full automatic, automatic feeding, rolling, punching, overturning for joining, multi spot welding, side seaming welding, terminal seam welding, side trimming, terminal cutting.
One line can produce four size radiator panel: 310mm, 480mm, 520mm, 535mm.
Length of radiator panel: 500~4000mm.
Rolling speed: 2~6m/min (if full automatic, line speed 1.5m/min)
PLC control, full automatic
Work flow
Decoiling- roll forming -hydraulic press-turn over table for two pieces joining -multiple spot welding- side seam welding- head welding -side shearing -head cutting -end product
Main Specification
| Item | Data | |
| Standard panel size | 310mm, 320mm, 460mm, 480mm, 520mm, 535mm, etc | |
| Panel length | 500-4000mm | |
| Length tolerance | ±1.0mm | |
| Panel bearing pressure | Positive pressure≥ 0.15Mpa, negative pressure ≥ 133Kpa, without deformation | |
| Panel material | ST12, SPCC, DC01 cold rolled steel, 1.0-1.2mm | |
| Total power | Approx 315KW | |
| Total line dimension | 46.5m X 3.5m | |
| Oil fluits size | Steel thickness 1.0mm | ≥ 11mm |
| Steel thickness 1.2mm | ≥ 11.5mm | |
| Number of oil fluits | Panel 310mm, 320mm | 3 |
| Panel 460mm, 480mm | 5 | |
| Panel 520mm, 535mm | 6 | |
| Input coil width | Panel 310mm | 325mm |
| Panel 460mm | 475mm | |
| Panel 520mm | 535mm | |
Machine photos
 Fully Automatic Transformer Panel Radiator Production Line
General
Transformer radiator fin forming & welding line, full automatic, automatic feeding, rolling, punching, overturning for joining, multi spot welding, side seaming welding, terminal seam welding, side trimming, terminal cutting.
One line can produce four size radiator panel: 310mm, 480mm, 520mm, 535mm.
Length of radiator panel: 500~4000mm.
Rolling speed: 2~6m/min (if full automatic, line speed 1.5m/min)
PLC control, full automatic
Work flow
Decoiling- roll forming -hydraulic press-turn over table for two pieces joining -multiple spot welding- side seam welding- head welding -side shearing -head cutting -end product
Main Specification
| Item | Data | |
| Standard panel size | 310mm, 320mm, 460mm, 480mm, 520mm, 535mm, etc | |
| Panel length | 500-4000mm | |
| Length tolerance | ±1.0mm | |
| Panel bearing pressure | Positive pressure≥ 0.15Mpa, negative pressure ≥ 133Kpa, without deformation | |
| Panel material | ST12, SPCC, DC01 cold rolled steel, 1.0-1.2mm | |
| Total power | Approx 315KW | |
| Total line dimension | 46.5m X 3.5m | |
| Oil fluits size | Steel thickness 1.0mm | ≥ 11mm |
| Steel thickness 1.2mm | ≥ 11.5mm | |
| Number of oil fluits | Panel 310mm, 320mm | 3 |
| Panel 460mm, 480mm | 5 | |
| Panel 520mm, 535mm | 6 | |
| Input coil width | Panel 310mm | 325mm |
| Panel 460mm | 475mm | |
| Panel 520mm | 535mm | |
Machine photos
Â
Double-Cone Rotary Vacuum Dryer
As a professional drying equipment manufacturer, we provide more than hundred sets of equipment for our users. The heating media such as high temperature heat transfer oil, middle temperature steam and low temperature hot water are available for our products. When drying viscous materials, we can design the special [copying" mechanism or set balls in the tank for you.
Applications:
It is suitable for concentration, mixing and drying of powder, granular and fibrous materials in such industries as chemical industry, medicine, food, etc., and materials that require low temperature drying(such as biochemical products), and is more suitable for drying of materials that are easy to oxidize, volatize, heat sensitive materials, irritant and poisonous materials, and materials in which breaking of crystals is not allowed.
Principle
• After the heat source(such as hot water, low pressure steam or heat transfer oil) is connected to the closed jacket, the heat is transferred from the inner shell to the materials to be dried.
• Driven by the power, the tank makes slow rotation and the materials in the tank are continuously mixed so as to realize the purpose of drying.
• When the materials are under vacuum, the steam pressure reduces to make the moisture(solvent) on material surtaces reach the saturation status and evaporate, and discharged and recovered timely from the vacuum pump. The moisture(solvent) inside the materials is penetrated, evaporated and discharged towards the surfaces. The three processes are carried out continuously, so that the materials are dried within a very short time.
Features
• During oil heating, automatic constant temperature control is adopted to dry biochemical products and mineral raw materials.
Temperatures vary within the range of 20-160℃.
• The heat efficiency is 2 times higher than that of common ovens.
• Indirect heating will cause no pollution to the materials, conforming to GMP requirements. The equipment is simple to repair and operate and easy to clean.
Double-Cone Rotary Vacuum Dryer,Rotary Cone Vacuum Dryer,Double Cone Vacuum Dryer,Double Cone Vacuum Dryer Machine
Jiangyin Jirui Machinery Manufacturing Co,LTD , https://www.jiruimachine.com