If you look at the selection of investment plans, please pay attention to the following questions:
1, the device out fine, estimates only and can not invest and build factories as the final basis. Therefore, China Mineral Processing Technology Network will not bear any losses caused by customers building factories according to this schedule.
2. The final selection design should be based on the feasible process test report, combined with the needs of the investor and the actual situation on the site, and can be implemented after professional design personnel design and strict technical argumentation.
3. The price of equipment in this list will fluctuate normally according to market conditions, and some equipment models can also be replaced reasonably under appropriate circumstances.
4. If you have any questions, please ask.
1, the device out fine, estimates only and can not invest and build factories as the final basis. Therefore, China Mineral Processing Technology Network will not bear any losses caused by customers building factories according to this schedule.
2. The final selection design should be based on the feasible process test report, combined with the needs of the investor and the actual situation on the site, and can be implemented after professional design personnel design and strict technical argumentation.
3. The price of equipment in this list will fluctuate normally according to market conditions, and some equipment models can also be replaced reasonably under appropriate circumstances.
4. If you have any questions, please ask.
150-200 tons / day copper plant equipment list
Equipment category | model | name | Quantity |
First, the crushing equipment | 980×1240 | Trough feeder | One |
PEF400×600 | Compound pendulum jaw crusher | One | |
PYB-600 | Standard cone crusher | One | |
SZZ 2 900×1800 | Self-centering vibrating screen, 25 mm upper layer, The lower layer is 15 mm. | One | |
B = 500 mm L = 22 m angle = 18 ° | Belt conveyors | One | |
B = 500 mm L = 20 m angle = 18 ° | Belt conveyors | One | |
B = 500 mm L = 15 m angle = 17 ° | Belt conveyors | One | |
B=370 | Vibrating feeder | One | |
MW1-6 | Magnetic iron hanging down | One | |
B=500 | Metal detector | One | |
Chain chain hoist | One | ||
Chain chain chain hoist monorail trolley | One | ||
Rectangular self-excited hydraulic dust collector | One | ||
Rectangular self-excited hydraulic dust collector | 2 sets | ||
Second, grinding classification equipment | ¢800 | Disc feeder | 2 sets |
B=500 mm L=8.6 m Angle=0 | Tape conveyor | One | |
MQG1500×3000 | Wet lattice ball mill | One | |
FLG-1200 | Sorghum spiral classifier | One | |
Third, lifting equipment | Manual single beam crane | 5 tons | |
Fourth, flotation equipment table | ¢1500×1500 | Stirring tank | One |
XJK-0.62 | Flotation machine 4 slots | 4 sets | |
Five, dehydration equipment | TNZ-6 | Center drive thickener | One |
5 m 2 | Cylindrical external filter | One | |
SZ-2 | Water ring vacuum pump | One | |
0.2 m 3 | Automatic water discharge filtrate cylinder | One | |
0.5 tons | Taiwan scale | One | |
six | 50 tons | Weighbridge | One |
Rebar Bender Cutter Machine,Steel Rebar Bender,,Automatic Rebar Cutter
NINGBO MAX MACHINERY CO.,LTD , https://www.max-machinery.com