The area where the cutting tool is prone to wear during turning is the rake face. Therefore, a small amount of lubricating oil mist is sprayed and infiltrated into the process to greatly reduce the friction. When using lath oil mist lubrication, it is necessary to pay attention to the following contents: For the external injection system lathe, the installation of the micro lubrication system should not affect the movement of the processing and other components; the internal lubrication lubrication lathe is the lubricant sprayed into the form of suspended oil mist particles. In the cutting area, the reliable flow of suspended particles must be maintained. Therefore, the design of the machine tool should be considered to ensure the reliable transportation of the suspended particles and the sealing of the channel. The matching of the cutting tool holder and the cutting tool should ensure that the lubricating oil mist particles can reach the cutting area. .
The amount of back-feeding, feed and cutting line speed in lathe processing are the main factors affecting the processing quality and processing efficiency, in order to improve the influence of cutting fluid on the processing environment and the adverse effects on lathe maintenance. Research and application of micro-oil mist lubrication on lathes is necessary. The advantages of the micro lubrication method are:
1,
Reduce cutting and maintenance costs.
2. The machine tool does not need to consider the protection design to prevent leakage, which can improve the life of the electrical system and reduce maintenance costs.
3,
Better processing quality and higher processing efficiency.
4,
Improve the processing life of cutting tools.
The gas source pressure of the lathe oil mist lubrication system requires normal operation at 5-7 bar, and better results can be obtained when the gas source pressure is increased to 8-10 bar.
Refer to the following case:
material:
Aluminum alloy
Machine tool: lathe
Machine speed: 0-5000 rpm
Lubrication system: Previous 5% emulsion
Later, Cote II Miniature Lubricating Oil
Workpiece size; ¢24*98
Round separator,also known as Vibrating Sifter,vibrating filter,Vibrating Sieve,vibro sifter,rotary sifter, uses vibration motor as the source of vibration,equipped eccentric hammer on the both sides of motor,the rotation of hammers change circumrotate to level ,upright and incline movement,then pass these three movement to surface of the screen mesh. Adjust the phasic angle of the top hammer and bottom hammer to change the movement track of the material. This will help to screen different materiel in different situation successfully.
Type of screen frame:flange type,ring type,gasket type,glue type.
Feature
The machine screening accuracy exceeds 90%.
It adopts whole sealing structure design,the sealed effect is fairly well,no dust pollution,no leaking liquid, no material left in machine,and no dead angle in the net frame.
Small volume and light weight,easy to be installed and maintained.
The outlet can be adjusted at any angle,and it is easy to change the screen.
The rubber ball device can reduce the chance of jam on the screen.
By adding the Ultrasonic Instrument Conversion device, superfine materials up to 600 mesh can be sieved.
Self cleaning device:silicone ball,rotary silicone brush,ultrasonic device and pneumatic device.
Automatic feeding system
Transparent plastic cover or sight glass window
Round separator in other designs are also available such as low profile design, double motor structure, avalanche design, high frequency design etc.
Application
1. Chemical Industry: colophony, industry leechdom, cosmetic, paint.
2. Grinding Materials And china Industry: alumina, quartz, slurry, kaoline, carborundum, sprayer dust.
3. Food Industry: sugar, flour, amylum, rice powder, milk powder, soyabean milk, angel cake, juice, sauce, spice, salt, starch.
4. Paper-Making Industry: dope, white soil slurry, black and white liquid, disposed liquid, paper-making liquid and waste water recycling.
5. Metallurgy, Mining Industry: aluminum powder, ceruse, copper powder, ore alloy powder, welding rod powder, dioxide manganese, electrolyze copper powder, electromagnetic material, rubbing powder, fire-proof material, kaoline, lime, heavy calcium carbonate.
6. Pharmacy Industry: chinese herbal medicine liquid, medicine powder, liquid and particle.
waranty
Our machines have an automatic 12 months guarantee against faulty material and workmanship valid from the date of dispatch in China or date of arrival at foreign border.
If any problem of the machine under instruction within one year,we are responsible for replacement incuding delivery fee and maintenance.
Lifelong service is offered with cost charge after one year.
Vibrating Screen,Vibrating Sifter,Vibrating Sieve,Ultrasonic Vibrating Screen
XINXIANG CHENWEI MACHINERY CO.,LTD , https://www.sieves.nl