The automotive sealant tape is one of the most important components of automobiles. It is widely used in doors, windows, bodywork, seats, sunroofs, engine boxes, trunks and other parts. It can produce rubber hinges used to install luggage compartment doors for passenger cars. With other waterproof, sealing and other effects.
Automotive sealant classification:
1, vulcanized rubber sealant
Generally three yuan ethylene propylene material. Excellent overall performance, outstanding ozone resistance, excellent weatherability, good resistance to high temperature and low temperature, outstanding chemical resistance, resistance to various polar solutes, and low relative density. The disadvantage is the large amount of swelling in general mineral oils and lubricating oils, generally dark products. Operating temperature range -60 ~ +150 °C. With its wide scope of application and excellent comprehensive performance, it has been recognized by domestic and foreign industrial enterprises.
2, silicone rubber sealant
Outstanding resistance to high and low temperature, ozone and weathering resistance; excellent hydrophobicity and proper air permeability; unrivalled insulation properties; sanitary grades that meet food hygiene requirements to meet the requirements of various colors. The disadvantage is that the mechanical strength is the worst in the rubber material and it is not resistant to oil. Operating temperature range -100 ~ +300 °C. It can be used in high temperature, cold, ultraviolet radiation and high-rise buildings.
3, neoprene sealant (CR)
Compared with other specialty rubbers, individual performance is worse, but the overall performance balance is good. It has excellent weather resistance, ozone resistance, heat aging resistance, oil and solvent resistance, good chemical resistance, excellent flame resistance, and good adhesion. Poor storage stability, hardenability during storage, and poor cold resistance. Relative density is high. Generally black products. Used in environments with oil, heat, and acid resistance requirements. Operating temperature range -30 ~ +120 °C.
4, nitrile rubber seal
The main features are oil and solvent resistance, but not tolerant to ketones, esters and chlorinated hydrocarbons, etc. The elasticity and mechanical properties are very good. Disadvantages are aging cracks in ozone and oxidation, poor cold resistance and low temperature resistance.
5, thermoplastic elastomer sealant
Has good elasticity and excellent abrasion resistance, good oil resistance, wide adjustable hardness range (Shore A hardness 65-80 degrees), excellent mechanical properties (tensile strength, elongation at break), excellent The cold resistance and chemical resistance of intertwined corrosion, the higher the price of raw materials. Recyclable material. Operating temperature range -60 ~ +80 °C. It is suitable for areas with strong vibration such as earthquake-prone areas, near railways or factories with high-power cranes, and areas with strong ultraviolet radiation.
6, thermoplastic vulcanizate (TPV) sealant
With the flexibility and elasticity of rubber, it can be produced by plastic processing method without vulcanization, and the waste can be recycled and reused. It is a material with a wide range of properties, good heat resistance, cold resistance, relative density, oil resistance, solvent resistance similar to neoprene, resistance to permanent deformation and abrasion resistance is not very good. Operating temperature range -40 ~ +150 °C. Applicable to cold, and high-rise buildings.
7. Plasticized polyvinyl chloride (PPVC) sealant
Materials are cheap and easy to obtain, with corrosion resistance, wear resistance, acid and alkali resistance and various chemical media, resistant to combustion, high mechanical strength; the disadvantage is that with the plasticizer within the system is easy to migrate, become hard and brittle, lose with the extension of time Elasticity, resistance to aging, poor weatherability and low temperature performance. Generally dark products. It is suitable for occasions where the light is not strong, the temperature does not change greatly, and the weather conditions are not bad.
8, surface coating material
The surface of the sealing strip is coated with polyurethane, silicone, PTFE, etc. to replace the traditional surface flocking process. The coated sealing strip has good wear resistance and smoothness, especially the sealing strip after coating the silicone surface layer coating, and the surface friction coefficient is small, which is favorable for sliding of the door and window fan. Suitable for doors and windows with sliding doors, sashes. It is a substitute for traditional siliconized wool tops.
Modular Underground coring drill rig
According To The Market Demand, We Produced Two Forms Of Underground Drill Rig,
1. Hkd-5 Is a Modular Rig, Used For Point Drilling.
2.The Hkd-5c Model Relates To a Mobile Drill Rig, Which Provides Exploration Services For Production Blasting.
JINAN ALLIANZ MACHINERY CO.,LTD is located Jinan City,Shandong province,is a collection of core drilling rig ,water well drilling machine and Compost Turner design, manufacture and installation of an integrated enterprise. We send our warmest welcome to all our business partners around the world to come and visit us at any time of convenience.
Modular Underground Coring Drill Rig,Diamond Coring Rig,Portable Exploration Core Drills,Portable Core Drilling Machine
Jinan Allianz machinery Co.Ltd , https://www.aprdrill.com