Model NO.: BH-HG
HS Code: 8455229090
Profile drawing
Main parameter
1.      Specification of rolling material: Width: 480mm; Thickness:3-4mm;        Q235A Galvanized steel sheet.
2.      Working speed: 10 -12m/min
3.      Roller steps: 13 pairs main rollers & 7 pairs flattening rollers
4.      Material of roller: GCr15 bearing steel, quenched, HRC58°-62°
5.      Material of main shaft: superior 45# steel, tempered.
6.      Diameter of main shaft: ¢85 mm
7.      Main motor power: 35 kw
8.      Transmission:double-row chain drive
9.      Structure of forming machine: wallboard
10.    Flattening motor power: 2.2 kw
11.    Hydraulic motor power: 11 kw, Pressure: 20 Mpa
12.    Material of Punching and Cutting mould:Cr12
13.    Cutting blade heat-treated.:HRC58°-62°
14.    Punching and Cutting Way:Adopt hydraulic driving, flat panel punching, cutting after roll forming.
15.    Electric control system: whole machine adopts PLC frequency control, Cut-to-length error≤±2mm
16.    Machine dimension:13500mm×2700mm×1600mm
Equipment configuration
Manual Feeding device (3 T capacity), transmission, flattening device, before-punching device (2 sets), main machine and roller (including guide table), cutting (after roll forming) device, hydraulic system, electric control system, run out table, etc.
Technological process figure
Â
Ningbo Huashun Instrument Co., Ltd , http://www.chwatermeter.com