Driving at night not only drives poor vision, but also makes it easier for the owner to get sleepy than during the day. Despite the fact that fewer people have fewer cars and less difficulty in driving, the rate of traffic accidents remains high, which is really a pain for the owner. In particular, improper use of lights during driving at night, inconvenience to others, and also to plant a time bomb for their own safety!
  So, how to use the lights correctly at night? Learn with Xiaoi!
Driving lights at first on the road at night 　
  Driving lights are commonly known as "little lights" or wide-width lights. The first thing a car owner must do is to turn on the driving lights at night to show the four corners of his vehicle to other surrounding vehicles to ensure a safe vehicle distance. The driving lights switch is generally the first stop of the light switch. The first car network reminds the owner that the two small lights at the front and rear of the vehicle are not large enough, but they are enough to allow the surrounding owners to see the four corners of the body. It should be dark in the sky. Lights are lit early in the rainy season or underground parking.
Urban traffic can be switched on 　　
  When driving in the urban area at night, the distance between the vehicles is often relatively short. In addition to the auxiliary lighting for street lamps on both sides of the road, the driver only needs to turn on the low beam light to see the condition of the road surface in front of the vehicle. The first car network reminds owners that traffic flow during driving at night in the urban area is large. Light beams from all directions are intricate and confusing to drive the line of sight. Turning on the high beam lights only causes dizzy eyes to the other owners and increases the accident rate of each other. At this point, the owner only needs to turn on the low beam to ensure that he can see the road conditions in front of the car.
It is best to use high beam on the national highway or highway 　　
  When the vehicle is running on a national highway with few people, a highway, or a highway with no street lighting, the owner is advised to use high beam lighting. When the high beam lights up, a blue light on the dashboard of the car lights up. . However, the first car network to remind owners, the road will be back in time when the car near the low light, so as not to dazzle the high beam lights caused by the other driver dazzle, reduce the car owners facing the line of sight interference.
Turn on fog lights when visibility is low
  In low visibility weather conditions such as haze or rain and snow, the owner needs to turn on the fog lights, use fog lights with high power, high brightness, strong penetration, so that other owners can find your vehicle as soon as possible. The first car network reminds owners that the function of the fog lamp is to allow the opposite or rear vehicle to see you early in the case of low visibility, so as to avoid the occurrence of danger, rather than the owner of the car to increase the exposure range for himself, otherwise the high brightness of the fog The light beam will only sting the eyes of other owners.
Road malfunction or towing vehicle should turn on double flash
  If there are sudden failures, traffic accidents, etc., during the night driving, you need to stop by the side or encounter a traction faulty vehicle. Whether it is a tractor or a tow vehicle, the vehicle should turn on the hazard warning flash in time. The first vehicle network reminds the owner that after the vehicle is parked sideways and the hazard warning flash is turned on, the owner should try to keep away from the faulty vehicle and turn off the high beam and low beam lights to prevent the battery from losing power.
Driving lights at first on the road at night 　
  Driving lights are commonly known as "little lights" or wide-width lights. The first thing a car owner must do is to turn on the driving lights at night to show the four corners of his vehicle to other surrounding vehicles to ensure a safe vehicle distance. The driving lights switch is generally the first stop of the light switch. The first car network reminds the owner that the two small lights at the front and rear of the vehicle are not large enough, but they are enough to allow the surrounding owners to see the four corners of the body. It should be dark in the sky. Lights are lit early in the rainy season or underground parking.
Urban traffic can be switched on 　　
  When driving in the urban area at night, the distance between the vehicles is often relatively short. In addition to the auxiliary lighting for street lamps on both sides of the road, the driver only needs to turn on the low beam light to see the condition of the road surface in front of the vehicle. The first car network reminds owners that traffic flow during driving at night in the urban area is large. Light beams from all directions are intricate and confusing to drive the line of sight. Turning on the high beam lights only causes dizzy eyes to the other owners and increases the accident rate of each other. At this point, the owner only needs to turn on the low beam to ensure that he can see the road conditions in front of the car.
It is best to use high beam on the national highway or highway 　　
  When the vehicle is running on a national highway with few people, a highway, or a highway with no street lighting, the owner is advised to use high beam lighting. When the high beam lights up, a blue light on the dashboard of the car lights up. . However, the first car network to remind owners, the road will be back in time when the car near the low light, so as not to dazzle the high beam lights caused by the other driver dazzle, reduce the car owners facing the line of sight interference.
Turn on fog lights when visibility is low
  In low visibility weather conditions such as haze or rain and snow, the owner needs to turn on the fog lights, use fog lights with high power, high brightness, strong penetration, so that other owners can find your vehicle as soon as possible. The first car network reminds owners that the function of the fog lamp is to allow the opposite or rear vehicle to see you early in the case of low visibility, so as to avoid the occurrence of danger, rather than the owner of the car to increase the exposure range for himself, otherwise the high brightness of the fog The light beam will only sting the eyes of other owners.
Road malfunction or towing vehicle should turn on double flash
  If there are sudden failures, traffic accidents, etc., during the night driving, you need to stop by the side or encounter a traction faulty vehicle. Whether it is a tractor or a tow vehicle, the vehicle should turn on the hazard warning flash in time. The first vehicle network reminds the owner that after the vehicle is parked sideways and the hazard warning flash is turned on, the owner should try to keep away from the faulty vehicle and turn off the high beam and low beam lights to prevent the battery from losing power.
Tire Air Chuck,Air Chucks,Clip On Air Chuck,Tire Inflation Air Chuck
Ningbo Kaisheng Auto Parts Co.,Ltd , https://www.valvestemfactory.com