Preliminary Analysis of the Color of Tester Material
The main frame, cross beam, and dynamometer shell of the testing machine are the largest parts and the largest color area is the key part of highlighting the main tone of the testing machine. The color design of these parts must be combined with the structural characteristics of the machine itself, considering the factors of human use of the product and the environmental factors, using warmer or cooler colors with higher brightness and lower purity. Preliminary Analysis of the Color of Tester Material
Bright color tone can make up for lack of indoor lighting, improve working conditions and gain open and bright visual and psychological effects. The color purity is low, which can avoid visual fatigue caused by the over-stimulation of the pure color on the human. Specifically, for a larger tester, the main color of a large tester product adopts a two-color configuration. The general configuration method for two colors is to brighten up, dark down, light up, and down, to get stable, balanced, and dignified. Exquisite, vivid feeling effect.
Large-scale testing machines generally have relatively coarse bodies, complicated structures, and many parts. If the color is not handled properly, it will give people a sense of bulkiness, disorder and even dangerous insecurity. At this time, ingenious use of bright and dark contrast tones for reasonable color matching will make the machine appear stable, light and vivid.
Such as electronic universal testing machine using black and white colors, computer white cover, which both with the computer, computer desk, printer color matching, but also reflects the precision of such machines. The inner cover, the cross beam, the base, and the jaws are unified in black, and these components are visually integrated. On the other hand, black has a strong sense of contraction, making the overall structure of the machine light and vivid.
For small-scale tester equipment, light and quiet colors, such as computer white, are generally used to express the precise and delicate features of the machine. Active parts of the color design of the test machine's active parts such as workbenches, jaws, fixtures, auxiliary tools, etc., these components and the main parts are combined through the active combination surface, easy to form the separation surface to achieve different color schemes . For parts that are not frequently used in the workbench, for the convenience of the operator, bright colors with high lightness and purity, such as vermilion or yellow, can be used to express a certain degree of movement.
At the same time, it plays a decorative role in the overall tone of the machine. But for more frequent activities such as jaws. Do not use too exciting too bright colors, due to the dynamic under the bright colors in front of the operator for a long time, easily lead to visual fatigue, feelings of irritability, work efficiency and other symptoms.
Operators often work in these areas, with frequent hand-eye movements. Therefore, the color of these areas should be non-irritating, non-glare, good visibility, and comfortable. Neutral colors with slightly lower purity, such as neutral gray, are generally used as the background color. When there are many function buttons on the mask, different colors can be used to distinguish. The emergency stop button or switch button should adopt a striking warning color and be arranged in the most convenient position.
The auxiliary components of the color design testing machine auxiliary components are oil source, electric control cabinet, tubing, pendulum, handle, rocker and so on. These parts usually use the same color as the main body to achieve the overall effect of product modeling. Sometimes, in order to make the machine color not too monotonous, it is also possible to use colors with the same hue and different lightness purity as the main hue, or the material color of the auxiliary itself. In this way, the color change is increased without losing the unity with the main color.
The color and location of logos, signs, and nameplates on the color design testing machine are handled well, which can serve to decorate and enhance the effect of the product, or to make the product meet the requirements of aesthetic laws such as balance, stability and change. The product color bell is a system of Ding Cheng, which is the aesthetic creation based on the practical function of the product. It is based on the human design center and the system design of “ human-product-environment †as a whole. Therefore, product color design involves people's physiology, psychology, product features, product material properties, product production methods, coloring process methods, product use environment and many other factors.
Blind Flanges are manufactured without a bore and used to blank off the ends of piping, Valves and pressure vessel openings.
From the standpoint of internal pressure and bolt loading, blind flanges, particularly in the larger sizes, are the most highly stressed flange types.
However, most of these stresses are bending types near the center, and since there is no standard inside diameter, these flanges are suitable for higher pressure temperature applications.
Blind Flange,Blank Flange,Blind Plate,Pipe Blind Flange
Fuyuan Marine Accessories Co., Ltd , https://www.fymarineparts.com