China Drying News China's plastics machinery industry already has a considerable scale. Luo Baihui, secretary-general of the International Die & Metal & Plastics Industry Suppliers Association pointed out: "At present, there are about 600 enterprises and units engaged in the manufacture of plastic machinery and related products in China. There are about 250 plastic molding equipment.†China's main plastic machinery production capacity has exceeded 100,000 sets, of which more than 8000 sets of extrusion equipment, more than 30,000 sets of injection molding machines, more than 3,000 sets of hollow molding equipment, and plastics machinery The output value reached 8 billion to 10 billion yuan. From the perspective of the market analysis of plastic products, combined with the full production capacity of China's original plastic machinery products, from 2001 to 2010, the average annual growth rate of the domestic market capacity of plastic machinery products is about 6%. In 2000 and 2005, they were 8 billion yuan, 11 billion yuan and 14.5 billion yuan respectively. With the improvement of China's product quality and the increase of its varieties, the share of plastics machinery products in the domestic market will also increase. It is expected that they will be 70%, 75%, and 80% respectively; the total industrial output value of plastics machinery products will be 5.6 billion yuan respectively. , 8.25 billion yuan and 11.6 billion yuan. With the increase of China's product exports, it is estimated that in 2012, China's industrial output value of plastic products will reach 16 billion yuan, and the average annual growth rate will be about 9%, of which the growth rate will be 10% from 2001 to 2005 and the growth rate will be from 2006 to 2010. It is 8%.
From the analysis of the number of plastic machinery products in 2000, 2005 were 5.5 million units, 7.5 million units in 2010 to 100,000 units, of which, about 35% of the injection molding machine, extruder group accounted for 25% Blow Molding Machine About 5%, other presses are 35%.
Since China’s plastics machinery manufacturing industry produced its first product in the 1950s, after nearly half a century, especially since the reform and opening up, high-speed development has been completed. Now that the complete varieties have been completed, major technologies and economic indicators have approached or reached the international advanced level, Supporting the development of a complete industrial system with internationalization, gradual professionalization and a relatively large scale, the products basically meet the needs of the domestic market, and the ability to earn foreign exchange through exports has rapidly increased.
Apart from meeting the domestic demand, China's plastic general-purpose equipment also increases its annual export volume. In the past three years, the export of plastics machinery products in China has been the fastest growing period in history. For a long time, foreign exchange earned through exports has been around 50 million U.S. dollars. In 1998, it exceeded 100 million U.S. dollars for the first time. In 2001, it increased to 238 million U.S. dollars, an increase of 31.09% over 2000.
Butt welded elbows are widely used in most project to change the direction of pipeline system. They shall be welded to pipes. So the both ends are machined to bevel ends. In many cases, different angles of elbows are needed, such as 45deg, 60deg, 90deg, 180deg and so on. Cause all the bend radius are not same, there are long radius and short radius elbows. Usually manufacture materials are carbon steel, alloy steel, stainless steel, aluminum, cooper. In our factory, you can see a lot of black pipe elbows. They are painted by customers` requests. On the way of transportation, painting will prevent rusting.
Butt Weld Elbow
Stainless Steel Elbow,Black Pipe Elbow,Steel Pipe Elbow,Aluminum Elbow
CANGZHOU HENGJIA PIPELINE CO.,LTD , http://www.czhjpipe.com