His own car will appear in heavy rain, such as the engine suddenly shut down, brakes out of control, etc., of which the majority of tire leaks. Experts remind that in summer, it is rainy. People should drive carefully when driving in the rain, and don't forget to do maintenance for cars after the rain.
“When the rainy season arrives, there are more cases of broken tires on the mixer tires. There were several vehicles to repair the tires this morning.†An auto repair shop in Erhuan South Road claimed that Xiaodong told reporters that due A lot of puddles form. When the car passes quickly, it is likely to injure the tires.
Remind the driver of a car. Be careful to avoid foreign objects during rainy days. When you encounter a puddle, the speed should not be too fast. When you feel that the steering wheel is getting heavier or the body tilts, it is likely that the tire has leaked and the owner should approach the repair shop for treatment. Zhang Xiaodong also listed a rainy car care list for the public.
1, to be cleaned in a timely manner. Some owners think that rain does not have to be car-washed. It is not true. When it encounters heavy rain, the car should be cleaned in time. Otherwise, the sludge around the tires of the car can easily accumulate sludge. The moisture also hides in it and the car body will rust. The simplest and most effective method to prevent acid in rainwater from damaging the vehicle body is to allow the owner to prepare a dry cloth and wipe the vehicle body in a simple manner. After the weather turns fine, go to the repair shop or 4S shop to give the car a car. All-round waxing and one-time polishing glaze.
2, rain cover hoods more vulnerable to injury. In addition, many vehicle owners are accustomed to putting on the vehicle's clothing, although it can prevent the surface of the vehicle from being damaged, but in case of windy and rainy weather, the vehicle's clothing will repeatedly pat paint, especially when the sand blows into the clothing. Numerous small scratches will be drawn on the car body, and the paint will darken over time.
3, scrape should be repaired immediately. In addition, if there is a scraping place on the surface of the car, after the protective layer of paint is peeled off, the rust will be born in case of wet and damp weather. Therefore, paint peeling off or deep scratches on the body should be repaired immediately, and the door and drain holes at the bottom of the body should be inspected and cleaned.
4, self-test brake fluid is damp. The wet weather during the rainy season will generate a large amount of water on the brake fluid cup and enter the brake fluid. If there is moisture entering the brake fluid, the high temperature generated during the braking process of the vehicle will evaporate a large amount of water vapor, and the compressibility of the gas will cause the brake to malfunction or even fail.
The owner can verify if there are problems with the brake system in three situations: the brakes must be stepped deeply, the brakes are heard, the brake distance is longer than before, and one of these three conditions occurs. The vehicle must be repaired. Factory inspection.
5, headlights have become a hidden danger. On rainy days, the headlights of the car are prone to flooding and the brightness is affected. The lighting direction of the headlights of the concrete mixer truck is changed, and the headlights may also be damaged, which may cause safety hazards. If the headlights have water mist, you can turn on the headlights. After 10 minutes, if the water mist in the headlights starts to disappear, can it completely disappear after one hour; if there is water mist, it must go to a professional after-sales service station for processing.
6, check the circuit. After rain, the car may have some impact on the performance of some parts of the car due to multiple irrigation, which can seriously lead to the car can not be opened normally. The circuit is likely to cause a short circuit after it encounters water. If the engine is off in progress, ignition cannot be started again, otherwise it is very easy to cause the engine to be scrapped. If there is wading, the circuit equipment should be processed in time, and the circuit can be wiped dry with a non-fibrous paper towel and textile and then started.
High precision double side surface grinding or fine grinding is a super finishing process performed by removing material from two surfaces of a component resulting in extremely precise geometric accuracy and surface finish. Typically, it is the last grinding step of a mechanical production chain utilized to improve and/or correct the geometry of parts coming from sintering, sawing, molding or similar operations. Depending on the application, the stock removal also can be taken from just one surface.
GMM1200 Double Side Surface Grinding Machine
Disc Grinder,High Precision Surface Grinding Machine,Precision Surface Grinder,Oil Nozzle Surface Grinding Machine
Xinxiang SKF machinery Co., Ltd. , http://www.facegrindingmachine.com