With the popularity of self-driving tours, many people want to use the holiday to go out by car. Many people with a driver's license may choose to rent a car to travel to a scenic spot. For people who do not have car rental experience, they may not understand how to rent a car, what to look out for when renting a car, what to look out for when renting a car, how to solve it, and people who want to rent a car may be very concerned about these issues. First list the six steps of a taxi tour below for your reference.
The first step: understand the procedures for renting a car
Before you rent a car, you must first understand the procedures for renting a car. Usually you have a local account for renting a car. The procedure for renting a car is relatively simple. As long as you provide the ID card, driver's license, and the original account of the family, sign the lease contract, and generally pay the required deposit on OK. If it is outside the car rental location, the procedure will be a lot of trouble, in addition to providing the identity card, the original driver's license, but also provide an economic mortgage not less than the value of the car rental, and even the need for Shanghai residents as a guarantee, the identity of the guarantor Passports, driver's licenses, and family accounts are also provided. If compatriots from Hong Kong, Macao, and Taiwan are foreigners, they must provide their original passports for returning hometowns or their passports, residence permits for foreigners, and Chinese driver’s licenses. They also need Shanghai residents to provide guarantees.
Step 2: Choose Car Rental Company and Vehicles Suitable for Traveling
After the car is rented out, it's time to pick a car. First, we should first understand the models and conditions of vehicles available for leasing companies to determine whether they are needed. Second, consult the company's rental form, rent and required documents, deposits, and so on.
Choose a car rental company:
Due to the complete formalities of the large leasing companies, and the greater advantages in the type and quantity of models and reputation, the company’s car rental companies are best to choose large companies. Small car rental companies not only have a small choice but also have less cost savings than large companies. Some small companies often add some fees while subcharging another company’s car. As a result, small companies’ car rental costs are sometimes more expensive than large companies.
In addition, if a large leasing company takes over a two-year or more contract, it generally can purchase new cars exclusively for customer requirements. Small companies can do little.
Car selection: Most people have a basic requirement for cars, fuel-efficient, sturdy, and high-passenger cars are the most popular.
Everyone who knows how to drive knows that the heavier and heavier the car is, the more fuel-efficient the car is, so the aluminum alloy wheels are fuel-efficient and are suitable for high-speed driving with a good level of stability. They also absorb vibrations and noises in motion. Cars equipped with radial tires are also more fuel efficient and have higher wear resistance. Automatic cars are more convenient, automatic transmissions are equipped with automatic control devices, and the gears are automatically adjusted according to the speed during the driving process, eliminating the need for shifting and clutching, but the power transmission of the automatic transmission is achieved through hydraulic pressure. , so it is more oil-consuming, especially at low speeds or stop-and-go when traffic jams, but also increased fuel consumption.
The third step: Signing contract
After choosing a car, the next step is to sign a complete leasing contract. Just in case, there are some precautions that must be kept in mind when signing: First, we must understand the daily limit of the vehicle and the overcharged charging standard. The daily mileage of a typical mid-range car should be within 120 kilometers. Of course, there is no limit to the number of individual companies.
In order to prevent accidents from being able to return the car in time, it is also necessary to carefully understand the renewal rules and the overdue billing criteria so as to avoid any dissent with the leasing company afterwards.
Carefully understand the leasing company's commitment to fully enjoy the entitlements. At the same time, if it finds any irrationality, it should negotiate with the leasing company in a timely manner.
Note: Some car rental companies have provisions on the mileage and area of ​​the car, especially in some tourist areas, pay attention to reading.
Step 4: Examination
The last step in signing a contract is to fill in the vehicle inspection form. This is the process by which both parties jointly identify the condition of the vehicle. It is of utmost importance. It is a pleasure to go out on the map. If the car fails on the road, it does not speak out, and even its own security is not guaranteed. In August of this year, one of Mr. Han of Shenyang had not seriously checked his car when he rented a car. As a result, a family of 7 was nearly killed in the daughter river and disputes with the car rental company continued afterwards. Because most of the rental company's cars are not new cars and are driven by different people, they are very prone to failure. Therefore, it is very important to have a careful inspection of the car when renting a car. It is best to have professional help.
What does a car inspection look like? Very careful, the same can not be less, one can not be taken care of.
I think security is the most important thing. Braking, steering, and lighting that directly affect traffic safety should be carefully checked. It is best to have a certain order when inspecting cars.
First check the appearance. Look at the car body for scratches, whether the lights are complete and whether the locks are normal. Fill in carefully to prevent unnecessary disputes.
Then open the lid and check the status of major components such as fuel, coolant, lubricant, brake fluid, battery, and transmission.
When there is no abnormality, you can enter the cab to check the operating conditions of the oil gauge, brake, and air conditioner.
Finally, we must remind everyone to test drive. First of all, we must adjust the position of the driver's seat to suit oneself. We must sit comfortably. The test drive is familiar with and check the working conditions of the clutch, throttle, brake and engine. It is also to familiarize with the function and position of each instrument and operating part as soon as possible to prevent chaos when the vehicle is driven.
Step 6: Return the car
The return location is usually the place where the car rental company is located or the hotel, and some companies have also opened the service to return the car in other places. You can check the car before you rent the car.
For example, in August of last year, Shanghai Anji Car Rental Co., Ltd. signed agreements with Hangzhou and Nanjing on the cooperation of “returning vehicles in different placesâ€, and the “retreat-and-shut-off†status of the car rental market in Shanghai, Jiangsu, and Zhejiang was broken. From Shanghai car rental to Hangzhou and Nanjing, the renter can use the car to stay in the local area, and the rental vehicles from Jiangsu and Zhejiang come to Shanghai to enjoy the same convenience. In April, the symposium on economic cooperation between Shanghai, Jiangsu and Zhejiang was held to determine the establishment of a unified car rental market in the three places as a starting point for stimulating regional tourism cooperation.
Note: If there is a problem with the vehicle during the journey, the leasing company will usually transfer the car to the lendee in time. Some companies also compensate for the delay time, that is, the leasing time is delayed by the delay, and if there is no relevant provisions of the car rental company. It is best for the lessee to submit in time in order to gain more initiative.
It should be reminded that if there is a traffic accident, it should be reported to the company in a timely manner and contact the leasing company. The leasing company should contact the insurance company, and the insurance company should send a judge to assess the damage caused by the accident.
Right now, the rules of the car rental industry are generally that the initial car repairs and medical expenses are paid by the lessee (the renter). After the compensation of the insurance company is in place, if the loss is within the compensation, the lessee will not have to pay compensation, otherwise the lessee will bear the compensation. Parts other than compensation. At the same time, the lessee must also compensate for the loss of work due to the repair of the vehicle.
A&M Manufacturing Co. Ltd. is a
professional mold casting manufacturer, with outstanding mold manufacturing,
mold casting and machining capabilities. It uses two types of Lost Wax Casting
technology, Silicon dissolved rubber shell technology and soluble glass
technology to produce molten casting. The main production of high temperature
alloy melt casting, Stainless Steel Casting, carbon steel lost wax casting,
alloy steel melt casting, aluminum melt casting, copper lost wax casting and
cast Iron Casting casting process. Its products, such as turbochargers or
Superchargers, turbine blades, turbine impellers, nozzles, stainless steel
valves, stainless steel pipes, flanges, marine hardware, automotive parts and
construction hardware, are widely used in almost all industrial fields, such as
aerospace engines, aerospace engines, Gas turbines, ships, metallurgy, oil, automobiles,
medical care and construction.
Copper Presicion Casting,Copper Investment Casting,Copper Silica Sol Casting,Investment Castings
A&M manufacturing co.Ltd , https://www.am-casting.com