When a car floats on the road, there is no shame, and driving in a crowded city will inevitably lead to bumps. According to the editor's degree of paint scratching, we have collected and sorted out some of the following ways of repairing the paint, and we hope to help you with your car.
According to the degree of scratches, the car is divided into three categories: 1. The body is slightly scratched; 2. The body finish is damaged; 3. The body paint is damaged and deformed.
The body is slightly scratched. The scratches of the slightly scratched paint are on the surface of the top coat and can be completely repaired by waxing.
Injury to the body finish If the scratch is a little deeper, part of the top coat is scraped off, but there is no serious deformation without damaging the primer. We can also restore the paint surface by waxing.
The standard for judging whether or not to injure the primer is to observe the color of the body scratches of a vehicle whose body is not white. If the scratch color is the same as the color of the body paint surface, it indicates that the primer has not been damaged; for a vehicle with a white body, Since the primer is generally white, judging whether the primer is scratched or not depends on the experience of the painter.
Injury to the body paint and deformation appeared white through scratches on the body, which indicates that scratches have damaged the primer. To repair this paint damage, we need to abrade the corresponding parts of the car paint, and then carry out sheet metal repair, and finally re-spray the paint on each floor.
The cost of spray-painting of different body parts is different from the cost of painting and repairing different parts of a car; paint is also divided into imported paint and homemade paint. For high-end imported models, we recommend using imported paint. Because the imported paint has a better color, it will not fade or change color after a long time.
Welding Flange is a flange type that flange welded on pipe to joint two pipes, welding flanges type for Slip On Flange , Weld Neck Flange, Plate Flange , Blind Flange , Socket Weld Flange and Lap Joint Flange, but Threaded Flange ( Screwed Flange ), part of Lapped Flange (loose flange) and backing rings are not welding on pipes, they are use thread to thread pipes for connection.
Welding Flange
Welding Flange,Welding Flange Pipe,Welding Steel Flange,Slip On Flange Welding
Jinan Hyupshin Flanges Co., Ltd , https://www.iflange.com