Dow Corning has a place in the fields of materials used in semiconductor manufacturing, such as dielectric materials and photosensitive resins. The company's recently introduced silicone photosensitive resin, which can be used for a new generation of 193 nm wavelengths, has also developed CVD dielectric materials for a new generation of semiconductors. In addition, Dow Corning found a way to reduce material consumption and silane coupling agent production costs, and developed a more economical method—the use of phase transfer catalysis to produce silanes in the silica treatment components needed for eco-friendly tires. , thereby reducing the cost of environmental protection tires, providing a feasible solution for the universal use of environmentally safe and environmentally friendly tires.
Rohm and Haas Company of the United States is committed to providing global customers with advanced new materials for semiconductors, optoelectronic products and industrial applications. Its markets include wafers, chips, optoelectronics, plastic plating, decorative precious metal plating and anti-corrosion, liquid crystal displays, etc. Multiple areas. The company's use of innovative technology produced 248nm and 193nm photoresist, anti-reflective coating, to meet the 300mm manufacturing requirements of the copper slurry and polishing pads, etc., fully demonstrated the advantages of Rohm and Haas in the field of new materials.
GE Global Research has developed a flexible organic light-emitting diode (OLED) substrate that has been developed from a high-temperature polycarbonate (PC) and a transparent, ultra-high barrier organic-inorganic coating. The coating can make the OLED device resistant to oxygen and moisture. This achievement uses a plastic substrate instead of glass to achieve a low-cost, lightweight, flexible organic display. This development will open the door for new applications such as portable, durable and rollable displays.
The United States Merck Chemicals Chilworth Technology Center has successfully developed a new type of polymer that is comparable to amorphous silicon in terms of its electrical conductivity. This polymer material is a polythiophene semiconductor that can replace amorphous silicon for the production of ultra-thin transistor substrates in screens and displays.
In addition, NEC Corporation of Japan developed an ultra-thin rechargeable flexible polymer battery with a recharge time of 30 seconds; PlasticLogic, a British plastics electronics developer, developed a flexible organic substrate display with a resolution of 100ppi; a generic display company Developed Phosphorescent Organic Light Emitting Diode (PHOLED) materials in cooperation with Mitsubishi Chemical Corporation. The total cost of OLEDs is 30% lower than that of liquid crystal displays (LCDs). A team of German scientists developed shape memory polymers that can be deformed by magnetic fields. .
Many new plastic materials and their new applications that cannot be replaced with conventional materials stand out from the crowd. Diolen Industrial Fibers of the Netherlands has become the first company in the world to develop high-tenacity polyfilament yarn based on polyphenylene sulfide (PPS) and bring this product to market. PPS is a highly functional polymer that combines high toughness with excellent chemical resistance, temperature resistance and fire resistance, and is suitable for high-end applications in harsh environments.
New types of biodegradable polymer composites are increasingly used. Cellphones commercially available in Japan have been made of shells made from grain-derived polymer composites. The Foé„„ma N701Ieco mobile phone's case replaces plastic made of petroleum with kenaf-reinforced polylactic acid (PLA) resin. This enclosure was jointly developed by NEC Electronics and the textile/plastic group Unitika. It is alleged that about 90% of the phone casing can be made from biomass.
New nanomaterials have also been continuously developed and utilized. For example, South Korea's LG Chemical Co., Ltd. has successfully developed high-impedance engineering plastic (EP) using nanotechnology, and has been applied to food, cosmetics, pesticides, and automotive fuel tanks. BASF launched Ultradur HighSpeed ​​nano-polymer modified polybutylene terephthalate (PBT), which has been used for the first time in commercial production of telephone line sockets.
The sprinkler truck is also known as the spraying car, multifunctional sprinkler, landscaping sprinkler, water tankers, water bowser ,Water Tank Truck ,water truck .The sprinkler is suitable for various pavement washing, trees, green belt, green lawn, roads, construction of factories and mines, high-altitude construction flushing. With water, dust, high, low spray, pesticide spraying, rail and other functions, but also has the function of water transport, water drainage, emergency fire and so on.
CLW GROUP TRUCK Spraying car, also known as multifunctional green sprinkler. For urban road, large plant, army, garden and other units of clean pavement, hygiene, dust, water, spraying pesticides, etc., in order to achieve the role of landscaping.
At the same time can be used for temporary emergency fire sprinkler, each sprinkler is equipped with fire special interface.
Driven by the engine gearbox, gearbox mounted power take-off drive sprinkler pumps, sprinkler pump produces the main driving force, inside the tank of liquid spray out through the network. Self suction height: less than or equal to 7m, sprinkler width: is equal to or more than 20m, maximum range: greater than or equal to 28m; adjusting the pillars, the range is more than or equal to 28m; also can adjust into fog, with a range of more than or equal to 5M.
Before the spray, sprinkle is arranged in front of the duck shaped nozzle or round blunt mouth, mounted behind the open sprinkler nozzle or shower nozzle of cylinder, at the back of the work platform, equipped with water cannons. The rear can also be arranged 8 nozzles (optional) sprinkler is generally used to wash the streets.
CLW GROUP TRUCK Tank production
The production process of automatic production line is divided into: feeding, automatic welding, head spinning forming, the body of a rolling molding and other advanced production processes. The tank material uses high quality carbon steel plate production. Special use cases can also be based on the needs of customers using 304 stainless steel. Tank volume is 4 cubic meters, 5 cubic meters, 6 cubic meters, 8 cubic meters, 10 cubic meters, 13 cubic meters, 15 cubic meters, etc..
Piping system
The pipeline, four three-way ball valve, through the ball valve, filter net, a water outlet (pediment sprinkle, side spray; high side of the shower; work platform with green sprinkler gun).
operating system
Mainly by the engine drive gearbox, gear box on the installation of power driven pump, sprinkler pump, the power of the tank, the liquid inside the tank through the pipe network. Scope of work: from the ceiling height: is equal to or more than 7m, sprinkler width: greater than or equal to 14m, maximum range: greater than or equal to 28m; adjusting the pillars, the range is more than or equal to 28m; also can be adjusted into a mist, with a range of more than or equal to 5M.
Sprinkling pump
CLW GROUP TRUCK Equipped with sprinkler, green spray vehicles high power special sprinkling pump (Weilong pump) and fire joint, with gravity flow valve, with self suction function.
Can be optional configuration: can be installed onto the medicine wheel, drug pumps, tank corrosion and rust, multi-faceted import and joint water, electromagnetic valve, gas dynamic valve and other advanced facilities, to meet the needs of different users.
Cab
The truck cab have one row or double row type , also known as the long head of the cab, the cab short head.
Force taking device
The general sprinkler by Dongfeng, Liberation Series PTO, gas operated, switch operation pulls back force taking gear in meshing position, through the drive shaft drives the pump work, the switch forwards a return, the pump is stopped. Force taking device is installed in the watering car gearbox body side of the equipment, automobile gearbox in general have the installation port and installed on the power device can be through the transmission constant mesh gear rotation to transmit the power out, and then through the driving component and controller to transmit power to the drum pay mix car, and pressure pump
CLW GROUP TRUCK Sprinkler function description:
Sprinkler with duck shaped nozzle or round blunt mouth, mounted behind the open sprinkler nozzle or shower nozzle of cylinder, at the back of the work platform, equipped with water cannons. The rear can also be arranged 8 nozzles (optional).
Sprinkler is generally used to wash the streets, dust and cooling, the sprinkler can be by adjusting the thread of the nozzle change direction and angle of sprinkler spray, water antiaircraft gun can be used for urban and rural landscape and emergency fire. Lotus mouth can be watered down the middle of the road dust sprinkler rushed up, play a role of air cleaning.
Water Tank Truck
Water Tank Truck,Water Sprinkler Truck,Water Sprinkler Vehicles,Stainless Steel Water Truck,Dongfeng Water Truck,Mini Water Truck,Water Spray Truck,Water Tanker Transport Truck
CLW GROUP TRUCK , https://www.clwgrouptruck.net