Color Mixer for Plastic Industry Usage

Description of plastic mixer machine
 
Our mixers have been passed the test of dynamic balance and static balance to reduce vibration. The pot wall is accurate grinding so that mixed materials will not stick to the pot. The main electricity use Siemens. Temperature controller use RKC. The electric control cabinet is with fan and light. Shaft seal adopts patent technology to ensure the shaft and pot connection won't leak material.
The large mixer unit customers may choose ABB converter and all our bearings use the famous brand bearing such as NSK, SKF that all depending on customers' requirements.
The stirring paddle is composed by up paddle, middle paddle and down paddle
the stirring barrel with open cover, use air cylinder to spragging the cover a little, and then shift horizontally, the cover then could open.
the sealed part use two level white silicone rubber for sealing.
The cover with feeding port and exhaust port( it can make hole according to customers)
the stirring barrel and motor could be fixed and with belt clamp device.
It can set discharge air cylinder to make sure discharge valve starts in a ray. With watch hole and blow hole, valve start limit spacing etc.
Air blows into the stirring barrel from the labyrinth seal. This kind of structure could avoid production entering shaft seal.
There is contactor switch with main machine to make sure the stirring pot could only work after cover closed.
Main electricity elements use Siemens(Suzhou)Brand name. Temperature controller is RKC from Japan. The electricity cabinet is simple and avoids dust.
B. Hot mixing motor  with ABB converter.
 
Technology parameter for plastic mixer machine
 
  
Photos of plastic mixer:



If you need more specification please contact:

Electrical Parts

Elevator Control System,Lifts Elevator Access Control System,Elevator Access Control System

Hosting Elevator Co., Ltd. , http://www.nbelevators.com