2013 Machinery Industry Development Trend Forecast

2013 Machinery Industry Development Trend Forecast In 2012, the growth rate of the machinery industry declined. From January to October, the total output value of the machinery industry was 14.9 trillion yuan, an increase of 11.91% year-on-year. The growth rate was the lowest in nearly 10 years (excluding 2009), and was 13% lower than the 2011 growth rate. . It is expected that the growth rate of production and sales in 2012 will increase by about 14% year-on-year, the profit growth rate will reach about 5%, and the increase in exports will be around 10%.

The major difficulties in the economic operation in 2012 included a sharp slowdown in demand growth, continued downward prices of products, almost all mechanical products being overcapacity, rising labor costs and financial costs, serious payment defaults, and a significant contraction in export demand.

Analysis of Supply and Demand Situation and Policy Environment of Machinery Industry in 2013: Domestic Demand Situation: The macro economy may be slightly warmer this year, but inflation pressure will be greater than this year. The form of external demand: The growth rate will continue to slow down, and there are many disadvantages in various aspects. The supply situation: The cost of procurement has been slowly rising, the pressure on financial costs has eased, the labor costs have continued to grow steadily, and the circulation of engineering machinery and other inventories is relatively large. The expansion of capacity expansion is the greatest danger. Industrial policy is very beneficial to the structural upgrading of the machinery industry.

Forecast of growth rate in 2013: The machinery industry has been transferred from a high-speed growth to a medium-term growth period, and it is under downward pressure from the previous year. The situation is still tight in 2013 and will not significantly pick up. The growth rate of production and sales in the machinery industry is expected to be around 10%, the profit growth is expected to be around 5%, and the export growth is expected to be around 8%.

The development trend of the main sub-industries in 2013 predicts that the automotive and internal-combustion engine industries will maintain a low growth rate of about 5%. The growth rate of the electrical equipment industry is lower than the average level of the machinery industry. In recent years, the growth of production and sales of machine tools and construction machinery has been excessive, and the amount of social possessions has been too large. Although the demand situation in 2013 was better than this year, it is also difficult to be optimistic. The estimated growth rate is below 10%. Instrumentation, cultural office, general petrochemicals, heavy machinery, basic parts, and food packaging machinery are relatively stable next year, with an estimated growth rate of around 10%. The agricultural machinery industry still has room for growth. Purchase subsidies are expected to increase. It is estimated that the growth rate will reach about 15%.

The PVC Granulating Production Line is mainly consisted by the following equipment: Conical twin screw extruder, die-face hot cutter mold, face cutting system, air blowing system etc.


Usage: This recycling production line is the best choice for recycling waste plastics like PVC materials.


Varies models for your capacity needs.

PVC Granulating Production Line

PVC Granulating Production Line,Conical Two Screw Extruder Granulating,Die Face Cutting Granulating Line

Suzhou Beakeland Machinery Co., Ltd. , http://www.beakelandpm.com

Posted on