Office Furniture Installation and Acceptance Notices Haida Instrument has always been focusing on the R&D and production of furniture testing instruments and serving Guangdong, Guangxi, Hainan, etc. Haida technicians have learned about the installation of some office furniture during their usual work experience and customer visits. Acceptance items are as follows:
First, the installation 1, installation conditions and installation of technical requirements The site should meet the requirements placed on furniture; installation workers have more than one year of furniture installation experience.
2, installation procedures, methods and precautions Installer:
(1) Class tables and conference tables: Taiwan foot → Zhonglian plate → Taiwan foot → table top;
(2) Cabinet: bottom plate → middle plate → fixed plate → side plate → back plate → top plate → door plate → drawer → active plate.
Installation method: Use a screwdriver to fasten the connecting rod to the embedded nut. When positioning the pin, insert the positioning pin of the wooden file at the same time, put the parts that need to be connected, and then put the eccentric into the hole, and the direction of the arrow is aligned with the connecting rod. Tighten it clockwise with a screwdriver.
Precautions: Do not miss the positioning pins and connectors. Many people work in close cooperation. It is strictly forbidden to use hard hands and do not allow them to hit the surface. The method and procedure for disassembly and the method and procedure for installation are the opposite.
3, adjustment procedures, methods and precautions First positioning, then adjust, after the fixed; according to the function of hardware accessories from loose to tight to adjust; do not use too much force to prevent damage to the product.
4. Installation and adjustment acceptance test methods and judgments (1) The overall structure of the product is firm, the landing is stable, and there is no loosening of the shaking components.
(2) Drawers and cabinet doors are smoothly pushed and pulled, suitable for elasticity, no abnormal noises, and uniform peripheral gaps.
(3) The lock is flexible and no jamming.
(4) The rail and the door hinge are in the right position, and the handle is flush and symmetrical.
(5) Boards, cabinet door panels, countertops, pump boxes, etc., are flush with each other.
Second, the use of 1, use methods gently hold, place a smooth.
2. Precautions and prone to mistakes The use and precautions are strictly prohibited. For relatively heavy furniture such as desks and conference tables, it must be disassembled into parts and then assembled.
Avoid contamination. If sodium chloride, acetic acid, ethanol, soy sauce, ink, iodine, etc., spill on the surface of the paint film, wipe it off immediately. When using new furniture, if there is a pungent odor in the room, please pay attention to ventilation. Do not place objects longer than 80oC on the painted surface to prevent burns.
When wiping furniture, it is best to use a soft cloth, avoid hard objects scratches, bumps, stamping furniture paint film. It should also be noted that the movable parts cannot be excessively strong, the impact of glass or mirrors may be impaired, the protruding parts such as handles may hang on the clothes, and the detachment of the structural parts may be removed.
Third, acceptance:
In strict accordance with national standards and your organization's requirements for self-inspection, with your organization for acceptance. And fill in the relevant documents. So that both parties can communicate.
Article Source: Dongguan Haida International Instrument is not allowed to reprint without permission! (Or: if you need to reprint, indicate the source)
First, the installation 1, installation conditions and installation of technical requirements The site should meet the requirements placed on furniture; installation workers have more than one year of furniture installation experience.
2, installation procedures, methods and precautions Installer:
(1) Class tables and conference tables: Taiwan foot → Zhonglian plate → Taiwan foot → table top;
(2) Cabinet: bottom plate → middle plate → fixed plate → side plate → back plate → top plate → door plate → drawer → active plate.
Installation method: Use a screwdriver to fasten the connecting rod to the embedded nut. When positioning the pin, insert the positioning pin of the wooden file at the same time, put the parts that need to be connected, and then put the eccentric into the hole, and the direction of the arrow is aligned with the connecting rod. Tighten it clockwise with a screwdriver.
Precautions: Do not miss the positioning pins and connectors. Many people work in close cooperation. It is strictly forbidden to use hard hands and do not allow them to hit the surface. The method and procedure for disassembly and the method and procedure for installation are the opposite.
3, adjustment procedures, methods and precautions First positioning, then adjust, after the fixed; according to the function of hardware accessories from loose to tight to adjust; do not use too much force to prevent damage to the product.
4. Installation and adjustment acceptance test methods and judgments (1) The overall structure of the product is firm, the landing is stable, and there is no loosening of the shaking components.
(2) Drawers and cabinet doors are smoothly pushed and pulled, suitable for elasticity, no abnormal noises, and uniform peripheral gaps.
(3) The lock is flexible and no jamming.
(4) The rail and the door hinge are in the right position, and the handle is flush and symmetrical.
(5) Boards, cabinet door panels, countertops, pump boxes, etc., are flush with each other.
Second, the use of 1, use methods gently hold, place a smooth.
2. Precautions and prone to mistakes The use and precautions are strictly prohibited. For relatively heavy furniture such as desks and conference tables, it must be disassembled into parts and then assembled.
Avoid contamination. If sodium chloride, acetic acid, ethanol, soy sauce, ink, iodine, etc., spill on the surface of the paint film, wipe it off immediately. When using new furniture, if there is a pungent odor in the room, please pay attention to ventilation. Do not place objects longer than 80oC on the painted surface to prevent burns.
When wiping furniture, it is best to use a soft cloth, avoid hard objects scratches, bumps, stamping furniture paint film. It should also be noted that the movable parts cannot be excessively strong, the impact of glass or mirrors may be impaired, the protruding parts such as handles may hang on the clothes, and the detachment of the structural parts may be removed.
Third, acceptance:
In strict accordance with national standards and your organization's requirements for self-inspection, with your organization for acceptance. And fill in the relevant documents. So that both parties can communicate.
Article Source: Dongguan Haida International Instrument is not allowed to reprint without permission! (Or: if you need to reprint, indicate the source)
Warranty
Sitong grants our clients a twelve-month-period or 3000-hours warranty for any machine purchased from us.
During the warranty period, in case the defect of material or workmanship has occurred with spare parts in normal operation. the defective part will be repaired and replaced free of charge, at our discretion.
Spare Parts
Sitong is dedicated to provide our clients with genuine spare parts with the highest quality, exact fitness and appropriate function. with our global distributor network, you are guaranteed with fast deliveries and services, wherever you are, please submit your spare parts request to us, and list products name, model, equipment serial number, description of required parts, we guarantee that your request will be handled quickly and appropriately.
Boom Crane,Boom Truck Crane,Boom Auto Crane,Boom Truck Mounted Crane
Jining Sitong Construction Machinery Co.,Ltd , http://www.cntruckcrane.com