The reporter learned from the High-tech Zone in Xiangyang City, Hubei Province that the district’s Hubei Province has begun to use Pang Xingxuan’s property on the 蹲 ㄉ璧 ㄉ璧 ㄉ璧 谑 谑 谑 谑 谑 谑 谑 畈 畈 畈 畈 畈 畈 畈 畈 畈 畈 畈 畈 诩 诩 诩 诩 诩 诩 诩 诩 诩At the same time, there are 600,000 pieces of equipment.
According to reports, hot stamping molding technology is to optimize the geometric design, the use of advanced processing and forming technology, so as to optimize the automotive parts and vehicle structure, have enhanced car crash intensity. At present, the core technology of global auto parts hot stamping is in the hands of foreign companies.
At present, the company's hot stamping auto parts, anti-collision performance and the yield strength of automotive steel plate has been tripled, to meet the European five-star collision standards.
Pang Xingxuan, who was established in Hubei Province in 010, took charge of the "Ultra High-Strength Steel Hot Stamping Technology Development" project supported by the Ministry of Science and Technology during the "Twelfth Five-Year Plan," after more than two years. The company's technological breakthroughs, the company's ultra-high strength steel hot stamping molding production line was successfully launched at the end of September this year, all achieved the domestic production of hot stamping auto parts production.
Starch Plate Frame Filter Press is a Intermittent pressure filtration equipment for solid liquid separation. Filter Press also name as plate frame filter press, plate filter. It`s consist of frame, Filter Plate pack, filter medium (Filter Cloth or filter paper), pressing system, electric control cabinet.
Features Of Starch Plate Frame Filter Press
| (1) |
Cost saving. |
| (2) |
Small capacity. |
| (3) |
Easy to operate and maintain. |
| (4) |
Can use filter paper as filtering medium to realize ultra-filtration. |
| (5) |
Lowest running cost. |
Filtration operation
The working of the plate and frame press is explained as that the slurry enters the frame which are marked by two dots from the feed channels and passes through the filter medium on to the surface of the plates which are marked by one dot.
The solids form a filter cake and remains in the frame. The thickness of the cake is half of the frame because on each side of the frame filtration occur.
Thus the two filter cakes are formed which meet eventally in the centre of the frame. In general there will be an optimum thickness of the filter cake for any slurry depending on the solids content in the slurry and the resistance of the filter cake.
The filtrate drains between the projections on the surface of the plates and the ecae from the outlets. As the filtration proceeds the resistance of the cake increases and the filtration rate decreases.
At a certain point it is preferable to stop the process rather than continuing at very low flow rates. The press is emptied and the cycle is restarted.
Starch Plate Frame Filter Press
Starch Plate Frame Filter Press
Corn Gluten Filter Press,Hydraulic Membrane Filter Press, Automatic Once Open Filter Press,Manual Discharging Filter Press
Hebei TianGuan Filter Press Co., Ltd. , http://www.filterpressure.com