On the 15th, the reporter learned from the Guangzhou Equity Exchange that the “Guangzhou Equity Exchange Public Vehicle Disposal Channel†(http://car.gemas.com.cn/) will release the auction information of the 100 direct bus auctions in Guangzhou on the 15th. Including the name of the target, vehicle information and status, listing price, trading conditions, trading methods, bidding time, margin payment, settlement of transaction price, etc.
It is understood that the above-mentioned hundred buses will be auctioned online on August 26 and will be displayed on the 15th to 23rd. The public can check the trading rules and bidding arrangements online before participating in the bidding.
Sixty percent of vehicles are estimated to be less than 30,000. It is understood that 100 buses including Honda, Toyota, Chuanqi, Ford, Buick and Jinbei have participated in the auction.
The models and ages of the participating vehicles are widely distributed, and the starting price is high or low, and the room for selection is large. It is understood that in this auction vehicle, the age of the car is about 30%, and 70% of it is about ten years. In addition, about 60% of vehicles have an estimated price of less than RMB 30,000, and a small number of vehicles with better vehicle conditions have an estimated price of RMB 80,000.
It is worth noting that the Yangcheng reporter also learned from relevant persons that the minimum starting price of the auction vehicle was 1,300 yuan, and the highest starting price was 140,000 yuan. The first shot of the field is the Honda Accord sedan with license plate number A10663. The starting price is 66,000 yuan, the driving age is 7 years, and the driving mileage is 89,000 kilometers. It is expected to become one of the key targets of this auction.
Auction implementation of "car license separation"
The Yangcheng Evening News reporter learned that for the first auction of uncompleted vehicles, the auction will be re-evaluated. If it has not been completed for three consecutive times, it will be replaced by the evaluation agency for evaluation, and will be auctioned again or processed according to the new evaluation conclusion.
For auction vehicles, there will be no “licensed auctionsâ€. The above-mentioned relevant persons said that the bus handled this time “without indicators without cardsâ€, that is, the vehicles that are sold do not continue to retain and use the original motor vehicle number plates. According to the current regulations, the vehicle license should be taken back by the public security traffic management department before the vehicle is scrapped or auctioned, and the “car license separation†is implemented. The bus reform will cancel the vehicle auction and will strictly enforce the relevant national laws and regulations. This means that if a bus taken by a unit or individual is transferred in Guangzhou, it must obtain the on-board indicator in accordance with the provisions of the “Regulations on the Control of the Total Amount of Small and Medium Passenger Cars in Guangzhouâ€.
Registration process for bidding process: From August 15th to 23rd, citizens can log in to the “Guangzhou Equity Exchange Public Transport Vehicle Disposal Channel†(http://car.gemas.com.cn/) for online registration. After successfully registering and paying the deposit within the specified time, the public can conduct online auction according to the information fee such as the auction account number and password.
Deadline for registration:
August 23, 17:00
Vehicle display time: August 15th to August 23rd (9:00-17:00)
Vehicle display location: Stage of Guangwu Automobile Trade Center, No. 888 Airport Road, Guangzhou.
6040 CO2 Laser Engraving Machine
New Laser Engraving and Cutting Machine. The machine is a kind of Laser Engraving Machine System equipped with CO2 laser Tube, it is used to engrave on wood, bamboo, plexiglass, crystal, leather, rubber, marble, ceramics and glass and etc. It is most suitable and the preferred choice of equipments in industries such as advertisement, gifts, shoes,toys and etc. It supports multiple graphic formats, such as HPGL, BMP, GIF, JPG, JPEG, DXF, DST, AI and so on.
This machine is equipped with DSP Control System for RDdraw directly,also supports CoreDraw and Auto CAD and other advance software. It must connect with computer with USB cable when you change the settings of machine for the design files,you can transfer the file with USB memory stick to the machine, or can download it to the machine directly with USB cable from computer. Even on the same Job, you can do setting with different colour in the software and also can making holes.And it can the legs separate from the main body of the machine. The machine has doors which can be opened to accommodate larger materials.
6040 Co2 Laser Engraving Machine,Co2 Laser Glass Engraving Machine,Mini 50W Co2 Laser Engraving Machine,Wood Laser Engraving Machine
Zhongcan Technology Co.,Ltd , https://www.zhongcanlaser.com