Produce the phenomenon of cavitation criteria
　　
Cavitation bubbles begin to appear at the blade inlet edge (nascent cavitation, NPSH) until the defined maximum bubble length (eg bubble length 5mm) is reached. In bubble observation experiments, the pressure at the inlet was gradually reduced until the first visible cavitation bubble appeared.
　　
· Cavitation of the pump may be caused by cavitation head lift (ΔH), reaching the defined maximum descent value △ H = 0.03H or in some high-speed operation of the screw pump often appear △ H = O.OOH (refers to the production of cavitation The initial stage of head descent). The corresponding NPSH value with NPSH. And NPSH. To represent.
　　
• Cavitation of the pump may decrease in efficiency (Δη) due to cavitation, reaching the defined maximum descent value (eg Δη = 0.03η).
　　
Pump cavitation may be due to cavitation head (â–³ H) decreased, leading to head failure (drop).
　　
Cavitation of the pump Material corrosion of the volute pump, which may be caused by cavitation, reaches the maximum defined for a fixed period of time.
　　
Pump cavitation may increase the noise level caused by cavitation, reaching the maximum noise level defined.
FIBER LASER CUTTING MACHINES
UTECH`s fiber laser machines are a must-have if you`re looking for quick and accurate cuts on sheets of metal. Metal fabrication shops and companies that manufacture customized metal parts can drastically improve their efficiency of production with our fiber laser cutting machines. Our machines are capable of cutting steel, brass, aluminum and stainless steel without fear of back reflections damaging the machine. By using these fiber laser machines, you`ll reduce your maintenance requirements and cut your operating costs considerably.
FIND THE RIGHT Fiber Laser Cutting Machine:
Product Application:
• Manufactured by people who use their own machines.
• The resonator comes with a 100,000 hour warranty from the manufacturer (IPG/Raycus)
• Higher cutting speeds possible
• Dual interchangeable tables allow for faster loading and unloading, reducing downtime
• Laser wavelength is one-tenth of a fiber laser
• Reduction in cutting variables or tribal knowledge
• Fiber Laser is extremely efficient, equates to very low power consumption
• Low cost of operation, energy cost reduced, no laser gases requied to produce beam
• High cutting flexibility (Steel, Stainless Steel, Brass, Copper, Titanium, Aluminum, and more)
• Laser beam transmitted through a fiber optic.cable rather than with mirrors and channel tubing resulting in negligible power loss.
Model
UT-1325
UT-1530
Option
Max Cutting Range
1300*2500mm
1500*3000mm
According to
Demands
Machine Size(L*W*H)
2.4*4.7*1.9m
2.4*5.7*1.9m
Accessory Parts(L*W*H)
Chitler 1*1*1.2m Control Box 1*0.8*1.8m
Fiber Module 0.5*0.6*0.14m
Laser Medium
Single Core Junction Semiconductor Module
Max Cutting Speed
25m/min
Cooling Way
Water Cooling
Laser Power
500W(Option 750W/1000W/2000W)
Min Line Width
0.1mm
Cutting Depth
0.2-6mm
Driving and Transmission Way
Imported Servo Motor and Linear Guide Rail
Power Requirements
380V/50Hz/16A
Continuous Working Time
24Hours
Related Weight
Machine Body 2732kg Trolley 116kg
Computer Cabinet 56kg Servo Cabinet 75kg
Transformer 77kg Chiller 93kg Fiber Module 50kg
Fiber Laser Cutting Machine Applicable Target Customers
» This series fiber laser cutting machine is suitable for the customers who need to process plenty of thin metal sheet and high reflective metal materials.
Fiber Laser Cutting Machine Applicable material
» Specially for carbon steel, stainless steel, alloy, aluminum, galvanized steel, titanium, brass, copper and other metal sheets.
Fiber Laser Cutting Machine Applicable Industry
» Sheet metal working, hardware, kitchenware, electronic, automotive parts, advertising sign, furniture, lighting, decoration, jewelry, etc.
Fiber Laser Cutting Machine
Fiber Laser Cutting Machine,Metal Fiber Laser Cutting Machine,Fiber Co2 Laser Cutting Machine,Automatic Fiber Laser Cutting Machine
Shandong U-May CNC Technology Co., Ltd. , http://www.fiberlasers.de