In the actual test system, the vibration decays very quickly due to the damping of the system under test. In order to obtain reliable data for the test, it is necessary to set various parameters of the test instrument according to the vibration condition and vibration frequency of the component (such as sampling frequency, number of lines, amplification factor, etc.), and the sensor should select a suitable mounting position and fix. In order to ensure good transferability, the impact signal of the hammer and the vibration response signal of the impacted component have a high correlation. The vibration of the gearbox increases with the increase of the load. The vibration of each measuring point of the gearbox shows that the vibration in the vertical direction is greater than the axial and horizontal directions, and the vibration has a certain orientation. At the same time, the vibration of the compressor coupling side is also large. The vibration of the free end of the motor and compressor is small. Therefore, it can be concluded that the vibration of the unit is mainly manifested in the gear box.
The analysis of the vibration spectrum analyzes the measuring points of the gearbox and finds that the main frequency component is 290 Hz. The frequency of the water-cooled screw unit is 5 times the frequency of the high-speed shaft of the gearbox, and the vibration amplitude is up to 18.3 m. The typical spectrum of the gearbox is analyzed by spectrum, which eliminates the common faults of the gearbox. Combined with the analysis of the total vibration before, it is found that the vibration of the gearbox in the vertical direction is greater than the axial and horizontal directions. The vibration has a certain directionality and the vibration amplitude. It increases with the increase of load and is sensitive to changes in load. Moreover, the frequency of the main frequency component of the vibration is higher than 5 times the rotational frequency, and the amplitude of the vibration is also very large. Therefore, it is suspected that the gearbox has the possibility of resonance.
Features & Applications:
Toothbrush is a necesity for people in daily life. There are many various kinds of toothbrush, such as dual color toothbrush, double color childrent toothbrush, dual color adult toothbrush, professional design dual color toothbrush, etc.
We can design and manufacture two color toothbrush for different clients by use vertical injection machine with rotary table. The machine can combines two or more different colors by means of injection molding. It involves the combination of hard PP and soft TPE, the combination of core and epidermis, the combination design of various colors and so on. The machine moves the jection molding position of each component by rotaing and sliding. During the production, injection system can be used individually, and two color injection at the same time, suitable for all kinds of double color toothbrush mold.
Double Color Toothbrush
Double Color Toothbrush,Double Fresh Color Adult Toothbrush,Professional Design Double Color Toothbrush
DONGGUAN TIANCHENG MACHINERY CO., LTD. , http://www.tcinjectionmachine.com