1. Test the motor steering is correct (with the pump body marked on the direction), the test time is short so as not to pump the internal rotation of the wear parts due to dry lubrication without liquid damage; drum pump 2. Open the exhaust valve to fill the liquid The entire pump, to be closed after the exhaust valve;
3. Check the various parts are normal; pneumatic diaphragm pump 4. High-temperature type should be preheated, the heating rate of 50 ℃ / hour, to ensure that all parts of the heat evenly. Colloid mill Second, start:
1. Close the pump outlet valve ;
2. Full open pump inlet valve;
3. Start the motor and observe whether the pump is running normally;
4. Adjust the outlet valve opening to the required conditions, such as users at the pump outlet equipped with flow meter or pressure gauge, the outlet valve should be adjusted by the opening of the pump performance parameters listed in the rated point on the operation, such as users In the pump outlet is not installed flow meter or pressure gauge, the outlet valve should be adjusted by opening; measuring pump motor current, the motor running within the rated current, otherwise it will cause the pump to overload operation (ie, high-current operation, Motor burnout) to adjust the outlet valve open big and small and pipeline conditions;
5. Check the seal leakage, the normal mechanical seal leakage should be less than 3 drops / min;
6. Check the motor, bearing temperature rise ≤ 80 ℃.
Third, downtime:
1. Close the outlet pipe valve
Cut off the power
3. Close the inlet pipe valve; submersible pump 4. If the pump is stopped for a long time, the liquid in the pump should be drained
China Ditribution Plate,Spinneret Distributing Plate,High Abrasion Resistance Distribution Plate,Hole Spinneret Nozzle Plate, we offered that you can trust. Welcome to do business with us.
Compared with electrical discharge machining and laser machining, drilling will not burden the workpiece, and can achieve high-precision, clean inner surface drilling.
High precision drilling of micro-holes above 0.06mm, ±0.002mm.
Changzhou Jier focuses on drilling and processing, guaranteeing higher precision.
Ultra-precision micro-hole processing technology has a wide range of applications in a variety of important products and equipment such as semiconductors, laboratory instruments and optical communication devices.
Main products: Professional micro-hole processing, taper-shaped small hole processing, oblique small hole processing, glass small hole processing, small deep hole processing, micro-machining, micro-processing, special processing.
Main products: Professional micro-hole processing, taper-shaped small hole processing, oblique small hole processing, glass small hole processing, small deep hole processing, micro-machining, micro-processing, special processing
Ditribution Plate,Spinneret Distributing Plate,High Abrasion Resistance Distribution Plate,Hole Spinneret Nozzle Plate
Changzhou Jier Precision Machinery Manufacturing Co., Ltd. , https://www.jier-spinneret.com