ZF began to recover the old valve body for a fee! The following describes the specific process flow of the recycling operation.
The first step is to carefully disassemble the new valve body package to avoid damage to the original packaging.
The second step is to replace the transmission valve body and leave the replaced old valve body for 5-10 minutes to remove residual oil.
The third step is to package the old valve body with the original red bag or anti-static bag.
The fourth step is to fill in the "ZF Old Parts Recycling Information Card" and put it into the original packaging carton together with the old valve body.
The fifth step is to hand over the packaged old parts to the dealer who sells the valve body. After passing the inspection, the new piece purchase fee can be deducted.
We invite you to support the recycling of old parts of ZF valve body. You can contribute to the environment while reducing your existing costs:
Paid recovery, maintenance costs straight down
The valve body is recycled and replaced with new ones, which directly reduces the purchase cost!
Work hard to support energy saving and environmental protection
The recycling process is simple and easy to get a good harvest of economy and environmental protection!
You and me, take social responsibility
Work together to promote sustainable circular economy development for the future!
The conical twin screw is different from the parallel twin screw in appearance. Its two ends have different diameters. The diameter of the feeding section is large, while the diameter of the homogenization section is small, and the middle is gradually transitioned. The conical twin-screw is a meshing type, and most of them are counter-rotating.
Conical Twin Screw Barrel,Barrel Screw Extruder,Extruder Screws And Barrels,Injection Screw And Barrel
Zhejiang Jinteng Machinery Manufacture Co., Ltd. , https://www.jintengmachine.com