Volvo puts pressure on German market to exert greater pressure on local car companies

Volvo drives the German market to put more pressure on local car companies Gasgoo Motors recently announced that the Volkswagen Group's situation in the German market has tended to exert greater pressure on local competitors' car companies.

The University of Duisburg Automotive Research Center uses the 19 brands in the German market as the survey object to calculate the average transaction price of each new car (Average Transaction Price). In the German auto market in 2011, the BMW and Mercedes-Benz brands ranked second with an average transaction price of 39,938 euros and 39,912 euros respectively; Audi was up 0.3% to 36,320 euros; Volvo was up 3.7% year-on-year to 35 , 039 Euros, which is more than 11101 Euros higher than the 5th Volkswagen brand (23,938). The report believes that the firm price of Volvo in Germany fully demonstrates the positioning of its luxury car brand.

From a sales perspective, although Volvo sales in Germany were lower than BMW's and other local luxury car brands in 2011, the growth rate was among the highest among luxury brands and among all brands. According to KBA (Kraftfahrt-Bundesamt) data from Germany, BMW's sales in Germany increased 11.5% year-on-year to 297,439 vehicles, Mercedes-Benz's growth was 1.6% to 285,651 units, and Audi increased 10.5% to 250,708 units. Volvo increased 31.4% year-on-year to 33,888 vehicles. Even considering other non-luxury car brands, Volvo’s sales growth is second only to Lancia.

Stefan Jacoby, Volvo’s CEO, previously pointed out: “If the positioning is ambiguous, it means that it is not a true luxury brand that loses its position in front of the competition. This is definitely not a suitable target for Volvo. We need to clarify the positioning of the luxury brand,” said Stefan Jacoby. Promote the Volvo brand grade higher.” From Volvo’s sales target, global sales will reach 800,000 by the end of this decade, and European sales will increase by 61% to 390,000 vehicles.

Other data reported by the University of Duisburg Automotive Research Center are as follows:

· The average transaction price of all new cars in Germany increased by 3.9% year-on-year to EUR 25,893 in 2011;

· The average price of the Ford brand was 21,526 Euros;

· The average transaction price of Japanese product cards was 20,123 Euros, which was a 13% increase compared to the same period of last year and was the highest among the 19 brands surveyed;

· The average transaction price of the Opel brand is 19,381 Euros;

· The average price of modern brands was 15,976 euros;

· The Fiat brand's average transaction price was 14,994 euros.

The grinder is widely used in medicine, chemical industry, pesticide, food and grain industry. The crusher utilizes the high-speed relative motion between the movable and fixed teeth to crush the crushed material through the combined action of tooth impact, friction and impact between the crushed materials. The machine has simple structure, ruggedness, smooth operation and good crushing effect. The crushed material can be discharged directly from the grinding chamber of the machine. The size of the particle can be obtained by replacing the screen with different apertures.


Matters needing attention
1, check whether there is a foreign body in the crushing cavity (before opening the machine must be empty), and connect the power supply.
2. Tighten the butterfly nut of the upper cover and the crushing chamber.
3. Start the motor, turn the air machine for 1-2 minutes, then gradually feed the beaten material from the feeding tray, the feeding should not be too fast and excessive.
4. If the material is stuck and the motor does not turn, please close it immediately so as not to burn the motor. After the stuck material is removed, it can be used again.
5. During the use of the machine, it is forbidden to open the upper cover and extend the hand into the crushing cavity.
6, the machine is a dry grinder, and it is not suitable to crush wet matter and greasy matter.
7. Users are required to replace different screens.
8. This machine adopts overheat protector. If the load of the motor is too large, it will stop automatically. If you continue to operate, please press the protector again.

Crushing SeriesRock Crushing PlantCrushing Mining Equipments


CHANGZHOU SULI DRYING EQUIPMENT CO.,LTD.specializing in the production of Mixing Dryer, Spray Dryer, Granulation Dryer ,Crushing Dryer, 3D Motion Mixer and V-shaped



Crushing Series

Crushing Series,Rock Crushing Plant,Crushing Mining Equipments,Impact Crushing Equipment

Changzhou Su Li drying equipment Co., Ltd. , http://www.sldrying.com

Posted on