From the appearance, you can see the obvious embracing steel frame:
The engine is mainly two-stroke, with 40cc or 50cc engine matching according to the needs of the owner. Of course, there are also bigger ones. But 50cc can have 16.8 horsepower. If you have a large displacement, it may be difficult to control in this car! And generally the large output is usually an adult ride. No one wants to give a first-time four-year-old child a 16.8-horse locomotive.
There is no gearbox on the power transmission. It is a single-speed structure. After all, the speed range that this small car faces is still within the range of single gear ratio. In addition, the power loss caused by the increase of the gearbox may be larger than the imagination. After all, the peak torque of the high output version is also about 10Nm. It may be more difficult to ride after the attenuation.
Like all cars, the power is as precious as gold and can't be wasted, so you can also see a very efficient transmission clutch and a thin drive chain in the car.
The tire is of course also a hot-melt tire for the track, but the interesting thing is that it is only 6.5 inches, and the tire width is only about 110mm, but it is already very wide for this car.
In the car you can see the pedals moving backwards and the rocker position adjuster. Of course, the brakes are also indispensable!
This large water-cooled row is not a fan of the car at all. Think about 50cc and more than 16 horses. The conversion is about 320 horses. It seems that such a large water-cooled row is not too much.
The fuel tank and other body parts are made of fiberglass. What is more special is that there is no front and rear suspension for this car. The tires that bear the main shock absorber function are the tires, and the flexibility of the frame itself, so it takes a lot of pains to adjust.
we have two kinds of 5 Axis Water Jet Cutting Machine. one is 5 axis waterjet with 10 degree cutting angle which is widely used in marble mosaic cutting, another is 5 axis with 60 degree cutting angle, we always also called 3D water cutting or dynamic water cutting.
5 axis with 10 degree waterjet machine is widely used in marble mosaic cutting. customer no need to make second-time processing for after marble cutting.
5 axis with 60 degree can cut curved materials and cut Cylindrical mosaic. A axis can rotating 0-75 degree. the cutting thickness can be 0.05mm. Effectively solve the problem that the workpieces cannot be placed in parallel in Waterjet Cutting.
5 Axis Water Jet Cutting Machine
Tile Cutting Machine,5 Axis Water Jet Cutting Machine,Waterjet Cutting System,Water Jet Cutter Machine
HARBIN QIAN FAN XI FENG MACHINERY CO.LTD , https://www.waterjetwamit.com